Factory Two Component Skin Grade Liquid Silicone Adhesion Nipple Pads
Factory Two Component Skin Grade Liquid silicone Adhesion Nipple Pads
Introduction
The silicone rubber is a two-component liquid silicone rubber for injection moulding processes.
RH6250-15A/B can be used to produce food grade technical articles with high transparency and excellent rubber elastic properties.
Liquid silicone rubber (LSR) is a two-part platinum-cured elastomer that is made of liquid silicone rubber base and catalyst. It is a synthetic material that is widely used in various industries due to its unique properties such as durability, flexibility, biocompatibility, and resistance to extreme temperatures and chemicals. It can be molded into various shapes and sizes, making it ideal for use in the manufacturing of medical devices, food-grade products, automotive parts, and household appliances. LSRs are also used in the aerospace, electrical, and electronics industries.
Technical data
Suitable for producing high transparent & high precision silicone rubber mold.
| Appearance |
Viscosity Pa.s |
Hardness |
Tear Strength KN/m |
Rebound % |
Tensile strength Mpa |
Linear shrinkage % |
|
| RH6250-15 | Transparent | 600 | 15 | 15 | 50 | 6.5 | 2.4 |
- This silicone rubber is packaged in A:B composition at 20 kg/barrel or 200 kg/barrel.
- The storage conditions are unmixed two-component sealed and stored at room temperature.
- It is important to note that this product should not be exposed to compounds containing N, P, and S, so as not to poison the platinum catalyst and affect the effect.
Packaging
It is available in 20kg pails & 200kg drums.
Store in a cool dry place out of direct sunlight, use it within 12 months from the day of manufacture.
About us
FAQ
1. What's silicone products you are making?
--liquid silicone rubber, silicone rubber, silicone oil; Platinum agent: -- According to different silicone molds, our silicone has different viscosity, and cause different hardness, density to meet the requests from client.
2. Do you offer free sample to client?
--Yes, we can provide the sample for test.
3. How about the quality control in your factory?
--We have professional QC team. --Each batch of silicone rubber must be tested by our safe quality examination system.
4. How to remove the bubbles during my mould making?
--After mixing liquid silicone with curing agent, please put the material into vacuum machine to take off the bubbles.
5. How to get good silicone mould to use longer time?
--The best way is:
1, Please choose the right liquid silicone according to your products.
2, Don't use any silicone oil in mold making, because it can make the silicone mould become too soft to use.
3, Silicone mould can be used longer after the whole silicone mould fully cured, so it's better to wait 2 hours after mould finished.
6. Why silicone rubber add curing agent after mixing a lot of bubbles?
--This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time, so, it must pass through the vacuum exhaust bubble treatment.
If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices in website because prices fluctuate for many reasons.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.