High Conductivity Platinum Cure Silicone Rubber RH4022P® 12 Months Shelf Life
High Conductivity Solid Silicone Rubber RH4022 ® for Platinum Vulcanization With FDA Certification
Description
Rui - He RH4022P ® is a kind of solid silicone rubber for extrusion processes, catalyzed by platinum. This silicone rubber is particularly developed for manufacturing all kinds of extruded tubes and profiled bars.
Key Features and Benefits
- Fantastic extrusion performance
- High resistance to yellow
- Excellent stability and flexibility at low temperatures
- Outstanding aging resistance
- Sensational weather resistance
- High stability to ozone and ultraviolet light
- excellent dielectric behavior over a wide range of temperatures
- Easy pigmentable with the LSR Color Pastes
Typical Properties
| RH4022P ® | |||
| Unit | |||
| Appearance | / | translucent | |
| Shore A Hardness | A | 40 ± 2 | |
| Tensile Strength | MPa·s | ≥ 7.0 | |
| Elongation | % | ≥ 450 | |
| Tear Strength | KN / m | ≥ 12 | |
| Linear Shrinkage | % | ≤ 0.5 | |
These figures are for reference only, please contact us for details.
Curing Method: platinum vulcanization
Applications
Because of the outstanding properties RH4022P ® solid silicone rubber is particularly suitable for tubes, bars, cold shrinkage termination, insulation tube, joint, and breakout.
Certificate
Rui-He RH4022P ® solid silicone rubber obtained the following test certificate: RoHS, FDA, REACH, PAHS, ISO9001:2016, etc.
Packaging & Storage
Available packed in 20kg cartons.
Store in a cool, dry place out of direct sunlight, use it within 12 months from the day of manufacture.
Notice
This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.
Knowledge
Q: How to get good silicone molds to use longer time?
A: The best way is:
- Please choose the right liquid silicone according to your products.
- Don't use any silicone oil in mold making, because it can make the silicone mold become too soft to use.
- Silicone mold can be used longer after the whole silicone mold fully cured. So it's better to wait 24 hours after mold finished.
Q: Is silicone safe for applications involving rapid decompression?
A: Silicone is very permeable to most gases and as such would not be ideal for use in applications involving rapid decompression.
Q: Can silicone be used for high traffic surfaces?
A: Products made from silicone should not be used in high traffic applications because even the best high strength compounds have a relatively modest resistance to abrasion wear.
If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices on the website because prices fluctuate for many reasons.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.