High Stability Medical Grade Silicone Rubber RH6250-30YH Apply To Medical Ball
High Stability Medical Grade Liquid Silicone Rubber Excellent Biocompatibility For Medical Ball
Typical Properties
| RH6250-30YH | |||
| Properties | Unit | A | B |
| Appearance | / | transparent | transparent |
| Viscosity | mPa.s | 1200000-1800000 | |
| Density | g/cm3 | 1.1±0.02 | |
| Shore A Hardness | A/JLS | 30±2 | |
| Tensile Strength | MPa | ≥7 | |
| Elongation at break | % | ≥650 | |
| Tear Strength | KN/m | ≥15 | |
| Linear Shrinkage | % | ≤0.5 | |
| Tensile set | % | ≥2.6 | |
| Rebound | % | ≥45 | |
| Compression set | (22 hrs at 175℃) % | ≤30 | |
These figures are for reference only, please contact us for details.
LSR is platinum cured(vulcanized) materials which are mixed in a 1:1 ratio by weight.
Typical properties of the vulcanisate: mixing ratio of components A: B = 1: 1.
Key Features and Benefits:
- Excellent biocompatibility
- High stability to ozone and ultraviolet light
- Neutral odor and taste
- Sterilizable with ethylene oxide, steam and gamma radiation
- Good transparency
- High thermal stability
- High recovery after a puncture
- Easy pigmentable with Colour Pastes
Certificate
Rui-He RH6250-30YH Liquid silicone rubber obtained the following test certificate: RoHS, FDA, MSDS, LFGB, ISO9001:2016.
Packaging & Storage
- RH6250-30YH Medical is available in 20kgs pails or 200kgs drums.
- Store in a cool dry place out of direct sunlight, use it within 12 months from the day of manufacture.
Details
| Trade terms | |
| Accepted Payment | T/T, L/C at sight, Western Union, Paypal, VISA, Credit Card, etc. |
| Leading time : | It takes 5-15 days after receiving the full deposit |
| Trade Term: | FOB, EXW, CIF. |
| Freight: | Ocean / Air / Courier |
Notice
This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.
Instructions
Here is a look at the LSR molding process:
1. LSR A + B components typically come in a 5-gallon pail or 55-gallon drum. A process controlled pumping kit presses down on the buckets to force the material into the static mixer and feed into the injection unit.
2. Then, streams of pigment can be added and controlled. In the injection, press material will be mixed together additionally with a screw and pushed forward to create a “shot” of material, or the amount needed to fill the mold.
3. After the material is injected into the mold, it will then stay clamped together to cure the LSR. Then, either an operator or a robot will remove the cured product from the mold and the cycle repeats. It is a very quick efficient process that typically averages 30 seconds.
If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices on the website because prices fluctuate for many reasons.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.