Reinforcement Fiberglass Mesh For Waterproofing Drywall Joints Tape
Product Description
Fiberglass adhesive mesh is made from C-glass or E-glass woven fabric then coated by acrylic acid copolymer liquid and adhesive glue. It is widely used for Exterior Insulation Finishing Systems (EIFS), Waterproof Roofing and Stone Reinforcement. Repair dry board wall, plasterboard joint, crack of wall and other wall surface breakage. Excellent alkali resistance, durable; high tensile strength and deformation resistance, crack prevention; no deterioration, no foam; excellent self-viscosity, no need to pre-bottom coating, quick, easy to use.
Specification
| Roll width | 50mm(2inch),100mm(4inch),150mm(6inch),200mm(8inch) |
| Roll length | 20m(22y),45m(50y),90m(100y),153m(168y) |
| Available colors | 50mm,75mm |
| Diameter of paper core | 50mm,75mm |
| Application | Drywall repairing,gypsum board jointing,cracks repairing |
Useage
repair dry wall, gypsum board joints, all kinds of wall cracks and other wall damage
Application Method
1. Keep walls clean and dry.
2. Tape the cracks and hold them tight.
3. Make sure the gap is covered by tape,then cut off the excess tape with a knife,and finally brush with mortar.
4. Let it dry naturally,then gently polish it with a construction hammer.
5. Fill with enough paint to make the wall smooth.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.