Low Voc Water Based Solid Acrylic Resin Similar Joncryl 67 For Synthesis Hard Emulsion
Low Voc Water Based Solid Acrylic Resin Similar Joncryl 67 For Synthesis Hard Emulsion
Product Introduction
WQ-132 is mainly used in the synthesis of water-based acrylic emulsions, with excellent permeability and transferability, excellent printability, good transparency, low VOC, low odor, especially suitable for the synthesis of hard emulsions, with low slag yield; for low cost and high viscosity emulsion polymerization.
Physical Property
| Appearance | Transparent Solid |
| Solid Content | >99% |
| Acid Value | 220 |
| Sofenting Point(℃) | 150 |
| Average Molecular Weight | 12000 |
| Tg(℃) | 110 |
| Density(g/cm3,25℃) | 1.16 |
Using
- Recommended amount of solids added: 10% to 15%
- Emulsifier addition amount: 0.5%～0.8%
- Amount of ammonium persulfate added: 0.3% to 0.5%
Application:
- As emulsifying agent in synthetic hard emulsion
- For emulsion polymerization
Packaging and Storage Condition
- Packing in 25KG/Bag
- The product should be stored in an airtight container to avoid freezing and high temperature. Recommended normal storage temperature is 10-35°
Special Tips
This material is complied according to our existing technology and experience, the technical advice provided is sincere, but it is not guaranteed to be used in all samples and formulations, all the data are for users reference only.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.