Acrylic Resin Emlsuion For Water Based Flexographic Varnish Ink For Coated Paper
Acrylic Resin Emlsuion Used For Water Based Flexographic Varnish Ink For Coated Paper
Introduction
WQ-2011 water based acrylic emulsion is alternative to Joncryl 89. WQ-2011 water based acrylic emulsion an acrylic polymer emulsion for use in water-based flexo/gravure inks, varnish, OPV. WQ-2011 waterborn acrylic emulsion has fast drying, high gloss, high transparency, and good resistance to heat and abrasion properties.
We recommend use WQ-2011 and WQ-227 together for water-based flexographic inks, varnish for Coated paper.
1, Fast drying and high gloss
2, Good transparency
3, Good resistance to heat & abrasion
4, Good anti-sticking and re-solubility
Typical Physical Characteristics
| Appearance | Translucent Milkywhite |
| Solid Content (%) | 47±1 |
| Acid Value | 51 |
| Viscosity(mPa*s) | 800-1500 |
| PH(25℃) | 8.0-9.0 |
| Tg(℃) | 98 |
| MFFT(℃) | <90 |
Storage condition
The product should be stored in a closed container to avoid freezing and high temperature, if possible, it should be used within six months. Suggested normal storage temperature is 10 to 35℃.
Packing
200kg small mouth plastic drum
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.