High Gloss Acrylic Emulsion For Water Based Flexographic Varnish And Ink
High Gloss Acrylic Emulsion For Water Based Flexographic Varnish And Ink For Polyethylene Bag
Introduction
WQ-2090 is a hard non-film-forming styrene-acrylic copolymer emulsion specially formulated for water-based overcoat varnishes and printing inks. The varnish formulated with this product has fast drying speed and high gloss, excellent water resistance and anti-stick back performance, and it has good compatibility with popular acrylic polymers on the market. Since this product cannot form a film alone, so it must be used with a suitable film-forming aids or mixed with a film-forming acrylic emulsion with a smaller particle size, such as used with our film-forming varnish emulsion WQ-2027, WQ-2024, WQ-2018, WQ-2015, etc. In addition, in flexo and gravure inks, the product has good pigment wetting.
We recommmed use WQ-2090 and WQ-2015 soft film-forming together for water based flexographic varnish and ink for polyethylene bag, shipping bag. Here is our recommend formula:
| No. | Raw Materials | % | |
| ① | WQ-2015 (film-forming) | 64.50 | |
| ② | WQ-2090 (non-film forming) | 10.00 | |
| ③ | WQ-2028 (pigment grinding) | 19.00 | |
| ④ | Wax emulsion | 4.00 | |
| ⑤ | DOWSIL™ 51 Additive | 2.00 | Dow Corning |
| ⑥ | Defoamer | 0.50 | |
| Total | 100.00 | ||
| Remark: 1. ①＋②＋③(Pre-mixed with ⑤)＋⑥ Add the above materials and stir at the same time, at a constant speed. 2. DC51 (1:1) diluted with ethanol 3. 4# cup: 15 seconds ± 2 PH value: 8.20 ± 0.5% |
|||
Physical Property:
| Appearance | Translucent milky emulsion |
| Solid content (%) | 45±1 |
| Viscosity at 25℃,cps(Brookfield, LVT No.4,60 RPM ) | 1000-2000 |
| Acid value | 65 |
| pH value | 8.0-9.0 |
| Density(g/l) | 1.02-1.05 |
| Particle size(μm) | 0.20-0.30 |
| MFFT (℃) | >90 |
| Tg(℃) | +110 |
Performance:
- High gloss, when properly formulated, it can produce very high gloss and excellent clarity
- Excellent wetting of pigments
- Very good drying speed
- Very good water and stick resistance, retains original gloss when wet surface dries
- Excellent brush and abrasion resistance
- Low odor
- Low cost
Application
- Water-based overcoat
- Water-based flexo, gravure varnish and ink
- Suitable for water-based plastic inks
- Suitable for all kinds of water-based varnishes and all kinds of high-grade water-based inks
Storage
The product should be stored in a closed container and avoid freezing and high temperature, Suggested normal storage temperature is 10 to 35℃.
Packing
200KG/Drum.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.