Galvanized Standing Seam Panel Machine Cold Rolled Type For S373 Profile
Roll forming line for S373 profile, cold rolled type, galvanized roll forming machine, soft material
Quick Detail:
- Thickness : 0.4-0.8mm
- Material : GI/Alu-zinc/ Aluminum/PPGL
- Input width : 610mm
- Effective width: S373mm
- Material weight : 3MT
- Coil inner diameter : 508mm
- Driven way: by 7.5Kw driven motor
- Cutting way: by 4.0Kw hydraulic cutting device
- Cutting tolerance : ±1mm
Application:
Compared to a regular roof panel roll forming machine, a standing seam roll forming machine has smaller sizes in body but more sophisticated rolling tools.
Machine designers innovated the standing seam roll forming machine for producing the metal roof panels out of pre-painted steel, zinc-coating or galvanized steel, zinc-alume/gal-alum steel, and occasionally aluminum as well. In fact, a standing seam roll forming machine produces fastener-hidden or concealed fixing roof panels which enjoy highly popularity in markets.
Standing Seam Metal Roofing is a fully interlocking roof system.
Machine list:
- 3T*600mm hydraulic un-coiler
- Polythene film device as request
- Roll former
- Hydraulic cutting device
- Run out table
- PLC control systems
Description/Technical Parameter details of complete line:
- 3TX600mm Hydraulic Un-Coiler
Hydraulic system for expansion coil-inner-hole with 4 palms
Link-connect expanding system
Pump power=1.5KW
Frequency Inverter to regulate turning speed: Motor: 2.2KW
Load capacity=3 Ton;
Coil Inner – diameter =451-530 mm
Coil outer-diameter=Max. 1500 mm
Coiler Width=Max. 600 mm
Driving motor to turn the coil
- Polythene film on device before feed in
- Entry Roller & Manual Pre-shearing device (Un-powered)
Smart cut control,
To cut off the end of the final piece of sheet only
Working thickness: max. 0.8mm
- Roll forming machine with cutting details as below table :
| Suitable roll forming material | PPGI/PPGL/GI/ALU-ZINC sheets |
| Thickness | 0.4mm-0.8mm |
| Coil input width | 610mm |
| Carriage Frame design | Wall-plate-frame-design with 18mm wall thickness |
| Rolling mills forming stages | 16 stages |
| Material of forming roller | 45# steel, CNC lathes, Hard Chrome Coated |
| Shafts Diameter | Φ75mm |
| Main motor power | 7.5Kw with reducer |
| Rolling speed of roll former | 15-20m/min |
| Hydraulic group power | 4.0 Kw |
| Cutting way | Hydraulic cutting with waste after cut-off |
| Electric Voltage Standard | 380V/50Hz/3PH or as requirements |
| Machine Color Painted | RAL 5015(Blue) or as requirements |
- PLC Control System
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
- Product Rack 4 meter long, rolled type
Profile Drawing/Layout/Equipment reference pictures:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.