40 FT Container Portable Standing Seam Machine For Rapid Roofing System
Portable standing seam machine in 40 FT container for rapid roofing system
Brief Introduction standing seam roof sheet roll forming machine:
There are standard standing seam roof panels such as 50-333, 50-429, 65-305, 65-333, 65-400, 65-459 and 65-500, and these profiles can be straight sheet, or tapered sheets. Like other concealed fixing standing seam roofing sheet roll forming machine, standing seam sheet roll forming machine can also handle with different widths material and manufacture different standing seam sheets on the same machine, like one machine can make both 65-400 and 65-450 type roof panels which joint with each other through clips too.
The profile is normally very long length and produce at site, so this standing seam machine is also designed/ fixed in 40FT container for easy transportation
Quick Detail:
- Thickness : 0.6-1.0mm
- Material : aluminum, steel
- Input width : 600mm
- Effective width: 468mm
- Material weight : 5MT
- Coil inner diameter : 508mm
- Driven way: by driven motor
- Cutting way: by hydraulic power pack
- Cutting tolerance : ±1mm
Machine list:
- 5T*600mm manual un-coiler
- Roll forming machine
- Hydraulic cutting device
- Run out table
- Siemens PLC and IOP/ touch screen, Schneider brand inverter
Description/Technical Parameter details of complete line:
- 5TX600mm manual rack for easy transportation
- Polythene film on device before feed in
- Roll forming machine with cutting details as below table :
| Suitable roll forming material | PPGI/PPGL/GI/ALU-ZINC sheets |
| Thickness | 0.6-1.0mm |
| Coil input width | Approx. 600mm |
| Carriage Frame design | Wall-plate-frame-design with18mm wall thickness |
| Roll forming stages | 18 stages |
| Roller material | 45# steel, CNC lathes, Hard chrome coated |
| Shafts Diameter | Φ75mm |
| Main motor power | 5.5Kw/7.5Kw with reducer |
| Line speed of roll former | 15m/min |
| Hydraulic group power | 3.0 Kw |
| Cutting way | Hydraulic cutting with waste after cut-off |
| Electric Voltage Standard | 380V/50Hz/3Ph or as requirements |
| Machine Color Painted | RAL 5015(Blue) or as requirements |
- PLC Control System
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
- Product Rack Un-powered, 3 units
Profile Drawing/Layout/Equipment reference pictures:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.