65mm Shaft Light Gauge G550 PPGL Batten Machine
Stud And Track Roll Forming Machine ,light gauge batten machine
Quick Detail:
- Thickness :0.4mm-0.8mm
- Input width : 121mm
- Material weight: 1.5MT cap.
- Driven way: by 4Kw driven motor
- Cutting way: waste cut
- Cutting tolerance : ±1mm
Machine list:
- 1.5MT*300mm manual un-coiler or driven motor
- Roll former
- Hydraulic cutting machine
- Run out table
- PLC control cabinet
General instruction:
The steel battens work most of time as roofing and ceiling. Steel foof and ceiling battens are light yet strong, offering an economical alternative to timber battens. Manufactured from hi-tensile zinc/al steel, the battens are capable to remain straight and consistent throughout their long life. The HAT shaped profile of the batten allows for nesting, making them easier to store, carry and handle.
There are so many metal or steel batten systems available for domestic internal use and even available for cyclonic and high wind regions.
The common reasons for applying steel roof and battens are as following:
Helps to prevent plaster board from cracking, which can happen when directly fixing the lining boards to timber.
It’s easy to obtain a flat level ceiling even if the timber is uneven.
Fixing of ceiling batten along with some clips will reduced impact of noise between the top and bottom floor in a residential house.
Timber shrinkage is less likely to affect steel battened linings.
Less chance for call-back maintenance saves time and money.
Description/Technical Parameter details of complete line:
- 1.5TX300mm Manual Un-Coiler
Un-powered; Load capacity= MAX.1.5Ton
Coil inner–diameter=410-570mm
Coil Width= MAX.300mm
- Roll forming machine with cutting details as below table :
| Suitable roll forming material | PPGL,G350-550 |
| Thickness | 0.4mm-0.8mm |
| Coil input width | 121mm |
| Carriage Frame design | Wall-plate-frame-design or stand frame design |
| Rolling mills forming stages | 14 stages |
| Material of forming roller | 45# steel, heat treatment, Hard Chrome Coated |
| Shafts Diameter | Φ65mm |
| Main motor power | 4Kw with reducer or 5.5KW |
| Line speed of roll former | 15mtr per min |
| Hydraulic group power | 3.0 Kw |
| Material of cutting blade | Cr12, hear treatment |
| Electric Voltage Standard | 415V/50Hz/3PH or requirements |
| Major Color of Machine Painted | RAL 5012(Sky Blue) or customized |
- PLC Control System
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
- Product Rack 6 meter length, rolled type
Profile Drawing/Layout/Equipment reference pictures:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.