75mm Shaft Cr12 Guard Rail Roll Forming Machine With CE Standard
Cr12 Steel Guard Rail Roll Forming Machine With CE Standard , High Efficiency
Quick Detail:
- Thickness : 0.8-1.2mm
- Material : GI, 350Mpa
- Input width : 174mm
- Material weight: 1.5MT cap.
- Driven way: by 11Kw driven motor
- Cutting way: stop to cut, there is waste after cut-off
- Cutting tolerance : ±1mm
Features:
Due to the heavy duty materials a rolling shutter door track roll forming machine usually bends, there are two types of transmission available for customers to choose: Chain-brackets transmission and Gear-box transmission.
Normaly drive by chain is enough to support the panel
Machine list:
- 1.5MT*300mm manual un-coiler
- Roll forming machine
- Cooling system for each stage
- Hydraulic cutting device
- Run out table
- PLC control cabinet
Description/Technical Parameter details of complete line:
- 1.5TX300mm Manual Un-Coiler or Driven de-coiler
Un-powered; Load capacity= MAX.1.5Ton
Coil inner–diameter=410-570mm
Coil Width= MAX.300mm
- Roll forming machine with cutting details as below table :
| Suitable roll forming material | galvanized steel sheet |
| Thickness | 0.8-1.2mm |
| Strip width | |
| Carriage Frame design | Wall-plate-frame-design |
| Roll forming stages | 15 stages |
| Roller material | 45# steel, heat treatment, hard chrome coated |
| Shafts Diameter | Φ75mm |
| Main motor power | 5.5Kw with reducer |
| Line speed of roll former | 15mtr per min |
| Hydraulic group power | 3.0Kw |
| Material of cutting blade | Cr12, hear treatment |
| Electric Voltage Standard | 220V/60Hz/3Ph or requirements |
| Major Color of Machine Painted | RAL 5015(Blue) or customized |
- PLC Control System
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
- Product Rack 4 meter length rolled type
Profile Drawing/Layout/Equipment reference pictures:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.