GENWELD 600A Diesel Welder Generator with Dual Welding Mode and 80L Fuel Tank for MMA/TIG/Gouging/Cellulose Welding

GENWELD LWG500 500A Diesel Welding Generator with MMA/Gouging/Cellulose/TIG Welding Process 

LWG600 dual welding generator features:

1. 50/60Hz single/three-phase power can be output simultaneously during the welding process

2. It adopts famous brand diesel engine, which has the characteristics of strong power, smooth operation, low noise and low fuel consumption.

3. Integrate MMA, cellulose, TIG, gouging welding processes, and are widely used.

4. The current adjustment range is wide and can realize carbon arc gouging with 8mm (and above) carbon rods.

5. Single/double operation mode is optional. Double welding does not interfere with each other. One machine can weld, cut, or operate a lamp or grinder at the same time, saving space on crowded construction sites or work vehicles.

6. It has the function of presetting welding current/voltage parameters and is easy to adjust.

7. Fast dynamic response and excellent welding performance.

8. Powerful AC auxiliary output power supply can drive ordinary power tools and lighting facilities.

9. Water temperature, oil pressure, and fuel quantity instruments are displayed separately for easy monitoring.

10. It adopts one-side integrated maintenance design for easy maintenance.

11. The engine has various alarm functions such as low oil pressure, high water temperature, low oil, etc.; the generator/welder has low voltage protection function.

12. Forklift holes and lifting rings facilitate transfer and handling

Specification sheet: