Product Name:Fuhua Bridge Rubber Bushing , Suspension Bushes , Suspension Equalizer Bush

Material: NBR

How to Install Rubber Bushing?

Use a wrench or vice grips to hold one of the nuts tight. Then torque the other nut with a wrench. As the socket pushes the bushing, the opposite socket acts as a brace, pressing up against the housing essentially pressing the bushing into the housing. After a few minutes, the bushing was entirely in the housing, all without a press.

Once we had the right tools, the process was very simple. We even used the same tool to remove the bushing and then put it BACK in. It’s really all about having the right tools. So if you are having trouble installing your bushing with your homemade bushing installer, remember:

• Find the Right Size Sockets or Pipes
• Use a Grade 8 Bolt
• Coarse threads, not Fine threads
• Use the largest diameter bolt possible
• Use washers as shims to reset thread
• Tall nut beats short nut everyday

Making sure you have the proper tools for the job is key to your success. But don’t forget these helpful tips and tricks:

• Lubricate the Bolt Thread
• Lubricate the Housing
• Freeze the Bushing