• Extremely soft: Utilizing highly compressible PE foam base material, it has excellent rebound and can minimize the expansion of ink dots to the greatest extent
• Strong anti-sagging: The modified acrylic adhesive has strong adhesion and can firmly fix the plate, preventing edge lifting or shifting during high-speed operation
• Easy to stick and remove: The textured release paper tape facilitates air exhaust, leaves no residue of glue when removing the plate, and supports the repositioning of the plate

• Fine Printing: Specializes in high-line count (over 100 lines), fine dots, and high-gloss level printing. The edges of the printed products are clearer.
• Specific Printing Plates: Particularly suitable for use with relatively hard digital photosensitive resin plates, effectively compensating for the insufficient buffering caused by the hardness of the plate.
• Small Diameter Plate Rollers: Can maintain excellent shock absorption effect on small-diameter plate rollers, and are highly suitable for long-format and high-speed printing.

Packaging method:  Width 460mm × Length 25m   1 roll /carton
                                 Width 1380mm × Length 25m  1 roll / carton

Correspondence Between Logo Colors and Specific Models

The following outlines the 5 color-coded hardness grades for the mainstream Softprint® 380μm / 15 mil narrow web series:

Yellow (X-Soft / Ultra Soft): tesa 52018 / 52118
Ideal for ultra-fine screens and high-quality highlight reproduction.
Red (Soft): tesa 52017 / 52117
Suitable for combination printing involving both halftones and solids.
Purple (Medium): tesa 52016 / 52116
Designed for universal applications, balancing solids, halftones, text, and barcodes.
Blue (Medium Hard): tesa 52015 / 52115
Best suited for solid and process combination printing.
Green (Hard): tesa 52014 / 52114
Ideal for solid blocks, lines, and text; effectively eliminates pinholing in solid areas.

Note:
The 520xx​ series typically corresponds to "Steel Master", designed for thicker plates (e.g., 1.70mm / 2.54mm). The 521xx​ series generally corresponds to "Steel Master TP", optimized for thinner plates (e.g., 1.14mm). While they differ in their recommended plate thickness, the foam hardness represented by the logo color remains consistent across both series.