high efficiency automatic plate machine price number plate machine Silica gel

Technical characteristics

Security Information

Please carefully read the following safety precautions for YT-HS190 automatic license plate stamping machine, and fully understand that this will bring convenience to you in the subsequent use, help you get the best use effect, avoid safety accidents. .

Safety Precautions:

(1) The equipment is operated by electricity, please cut off the power in case of emergency;

(2) Please do not attempt to repair this equipment yourself. The repair work can only be done by trained and qualified personnel. Please turn off the power when the equipment fails, and contact our after-sales maintenance department;

(3) The rubber roller will be very hot during use or just after use. Do not touch it with your hands to avoid burns;

(4) Pay attention to safety tips to protect your body from injury;

(5) Do not remove the safety cover;

(6) It is forbidden to touch the crimping device, including the motor, during the printing work of the device;

(7) After the use is completed, the power cannot be turned off immediately, and the main motor is turned on to dissipate the rubber roller to avoid damage to the machine;

(8) Turn off the power after the temperature is lowered to 80 degrees after use;

• Using oil-free silent air pump, the working noise is small and the air pressure is stable;
• The contact temperature sensor is used for accurate temperature detection and high time efficiency;
• The speed of the rubber roller and the hot stamping temperature are adjustable to meet the requirements of temperature and hot stamping speed of different manufacturers' hot stamping film;
• The license plate guide plate can be quickly adjusted, and the size license plate can be quickly switched;
• The control part of the electric appliance is separated from the main body of the hot stamping machine, which is convenient for maintenance and repair  

• Parameter

License plate hot stamping effect requirements:

After hot stamping, the characters transferred to the surface of the number plate and the border of the border should be neat and burr-free. The surface of the imprinted surface should be uniform in color, and there should be no obvious defects such as peeling, curling, wrinkles, grain impurities and missing printing.

Adhesion performance:

After the hot stamping, the metal material plate is peeled off with an adhesive tape, and the print should not be detached or warped.

Sand resistance performance:

The metal material plate after hot stamping should be able to withstand wind and sand, and the surface should not be damaged, sunken, peeled off, faded and other defects.

Technical features:

The main parts are made of aluminum alloy, which is small, light and convenient to move, especially suitable for license plate production points;

The rack comes with universal moving casters for easy movement and fixing;

Industrial tablet touch screen control, integrated parameter settings, operation, equipment calibration, alarm information prompts and other functions;

The preheating device can preheat the semi-finished license plate to reduce the heat loss of hot stamping and enhance the hot stamping effect;

·The heat sink can quickly dissipate the device and save time;

·The film end adopts magnetic powder brake device, full digital and high-precision tension control to avoid wrinkling of hot stamping film;

·The rubber roller adopts imported silicone rubber and has a temperature resistance of 300 °C;

·Imported far-infrared ceramic heating, uniform heating, fast temperature compensation;

·The rubber roller is electrically lifted and the height of the press roller can be adjusted automatically;

·The conveyor belt cooperates with the entry and exit rollers to ensure the smooth and accurate delivery and delivery of the license plate;