When the heat source (hot water, low-pressure steam, or thermal oil) pass through the sealed jacket, the heat will be transmitted to the raw material through the inner shell;

Under the action of driving power, the tank is rotated slowly and the raw material is mixed continuously.

The purpose of reinforced drying can be realized

The raw material is under vacuum condition. When steam pressure is dropping, it makes the moisture (solvent) at the surface of raw material become saturation and then evaporates. The solvent will be discharged through the vacuum pump.

The moisture (solvent) of raw material will infiltrate, evaporate and discharge continuously.

The production processes are carried out continuously and the drying can be done in a short time.

Features of Automated Cost Effective Customized Fruits Double Cone Continuous Vacuum Dryer With Remote Control

Energy Saving Automatic Functioning Vacuum Fruit Drying Machine is a new style dryer which integrated mixing and drying. It made up of vacuum dry equipment by condensator, vacuum pump match with dryer. (If it is no need to resolve the solvent, the condensator may not be used). The design of this machine is advanced and the inner structure is simple, so that it is easy to clean and the raw material can be discharged fully, the operation is also very simple. It can reduce labor strength and improve working environment. Meanwhile, when the cylinder is rotating, the raw material is also rotating, the wall of cylinder cannot be accumulated on the wall, so the coefficient of thermal transmission is high and the drying rate is also very high. Not only it can save energy but also the raw material can be dried fully and uniformly and the quality of products is good. It is widely used to pharmaceutical industry, chemical industry, foodstuff industry, dyestuff industry... It is in conformity with the requirements of "GMP".