Reducer Concentric, Diam:12"x6" ,Sch: S-40S/S-10ASME B16.9 ASTM A403-SMLS Gr. WP316L(UNS S31603).

 
Reducer Concentric, Diam:12"x6" ,Sch: S-10S/S-10S ASME B16.9 ASTM A403-SMLS Gr. WP316L(UNS S31603)..

 
 
 
brief introduction
 
The big and small heads whose center is in a straight line are called concentric big and small heads. The commonly used forming process is reduced diameter pressing, expanded diameter pressing or reduced diameter plus expanded diameter pressing. Stamping can also be used for reducing pipes of some specifications.
 

distribution characteristics

(1) The bending moment caused by the area pressure difference between the large and small ends of concentric reducer under the action of internal pressure causes the relative opening of the large end and the relative contraction of the small end;

(2) Under the action of internal pressure, the circumferential stress on the inner surface of the large end on the eccentric side and the outer surface of the middle part on the eccentric side of the eccentric reducer is the largest.

 
Corrosion resistance

features

1) Cold rolled products have good gloss and beautiful appearance;

2) Due to the addition of Mo, the corrosion resistance, especially pitting resistance, is excellent;

3) excellent high temperature strength; From "I want stainless steel"

4) Excellent work hardening (weak magnetism after processing)

5) Non magnetic in solid solution state;

6) Compared with 304 stainless steel, the price is higher

 

Q1: Are you trading company or manufacturer ?
 
A: We are factory.
 
Q2: How long is the delivery ?
 
A: 15-30 working days

Q3: Do you provide samples ? is it free or extra ?

 
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
 
If you want to get more information of the products, send me e-mail or by skype, whatsapp etc.
.
 
If any questions,you can call me mobile phone at any times:0086-15710108231