Enclosed UV Laser Marking Machine For Glass PCB Cell Phone IC Ceramic
Ultraviolet Maker Enclosed UV Laser Marking Machine For Glass PCB Cell Phone IC Ceramic
Applications:
1. UV Laser marking and engraving Machine adopts UV laser generator .
2. The ultra-small focusing spot of 355nm UV light doesn't break the surface of glass.
3. There is no heating effects when marking and Engraving,so it would not deform the wafer.
4. The machine adopts high quality and imported UV laser generator.
5. The UV light can ensure hyper-fine Engraving ,the minimum Engraving character can be accurate to 0.2mm.
Application material.
6. It is used in the material that have big heat radiation reaction,some special materials,most metal and nonmetal materials.
7. It is applied in ultra-fine laser Engraving in high-end market.
Advantage of UV Laser Source.
The advantage of laser are:
* High speed
* Low cost
* Precision
* Environmental
* The marks never fades
* Long working life
* 24 hours continuos work
The UV laser beam modifies the material surface, creating permanent marks without removing material or impacting surface integrity.
Whether it's pint glasses, shot glasses, coffee mugs, wine glasses, wine bottles, etc. UV Laser can work with all type of glass products
UV Laser Marking produces a beautiful frosted effect,which can engrave custom logos and designs on nearly any glass product.
Product information:
| Model | |
| 110*1100mm |
| 107*77*110cm |
| 3w 5w |
| 0 - 24,000mm/min |
| ±0.1mm |
| AC 220V ±10%, 50 - 60Hz |
| <1,000W |
| 0 - 45°C |
| 8 - 95% |
| BMP, HPGL, PLT, DST, DXP, and AI |
| Stepper driving |
| Water-cooling |
| Lifting Bench |
| BJ JCZ EZCAD |
UV laser marking machine applicable industries:
2. Gold plating, silver and other surface marking
3. UV oil plastic material surface marking,eg: samsung panel, melamine
4. Mark the surface of dehalogenated elemental materials, eg: IPHONE charger, connection wire and other peripheral products
5. Daily necessities (beverage packaging, food packaging)
6. Marking of cables and cables
7. Various pipe surface marks
8. Flexible materials and carbon fiber cutting (the material thickness is only 200um)
2. By using a process sometimes called "cold ablation", the laser beam produces a reduced thermal impact zone that minimizes the impact of flanging, carbonation, and other thermal stresses that are usually present in higher power lasers.
3. The ultraviolet laser beam can be 10-20 degrees Celsius
Sample show:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.