CE Standard HDPE Blow Moulding Machine For Spray Water Bottle
HDPE Blow Moulding Machine With CE Standard for Spray water bottle
Introduction:
MP80D is specifically designed for making bottles from 10ml up to maximum 10L. It is hydraulic driven with accrate eletrical control system. MP80D has double stations to increase the production efficiency. Also, it has variety of choice of die heads. With more than 10 years of success in the market, MP80D is updated to be one of the most reliable and popular model in the world.
Meet CE standard for European market.
European machine qualiy with China machine price
Notes: According to requirements of “ Regulations of Electric Device for Low
Voltage Users”, zero wire should be connected for safe. Insulation resistance shouldn’t be less than 2 megohms. Hand operating electric elements shouldn’t less than 5 megohms for personal safety.
After connecting 3-phrase wires and zero wire, check whether connecting direction of input 3-phrase wires conforms with connecting direction of machine system. Check method is as follow: Start oil pump motor in a trial way to check whether the rotation direction conforms to the direction indication. You can not run the machine regularly unless their direction is the same. If not the same, exchange two wires of A-B-C in junction box. Long time reversing rotation will do harm to oil pump. Be careful!
Machine specification:
| MP80D | ||
| Material | PE,PP,(PVC,PA)OPTION | |
| Max container capacity | L | 10 |
| Number of die | set | 1,2,3,4,6,8 |
| machine Dimension(L×W×H) | M | 3.82×2.54×2.5 |
| Total weight | ton | 4.5 |
| Clamping force | kn | 120 |
| Platen opening stroks | mm | 220-620 |
| Stroke of mould board | mm | 400 |
| Platen size | mm | 420×520 |
| Max mould size(W×H) | mm | 480×500 |
| Mould thinkness | mm | 225-300 |
| Screw diameter | mm | 80 |
| Screw L/D ratio | L/D | 24 |
| Plasticising capacity | kg/h | 85 |
| Number of heating zone | zone | 4 |
| Extruder heating power | kw | 18.5 |
| Power of screw-bar machine | kw | 0.22 |
| Extruder driving power | kw | 30 |
| Number of heating zone | zone | 2 |
| Power of die heating | kw | 13.5 |
| Max die-pin diameter | mm | 180 |
| General power of machine | kw | 73.7 |
| Power of the electric motor of oil pump | kw | 9.5 |
| Air pressure | Mpa | 0.6-0.8 |
| Average energy consumption | kw | 35 |
| Using quantity of compression air | m3/min | 1.5-2.5 |
| Using quantity of cooling water | m3/min | 3.0-5.0 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.