Multi-layer Multi-cavity Extrusion Blow Moulding MP70FS-4 IML In mold labeling for food packing bottle

Introduction:

MP70FS IML is specifically designed for making bottles from 600ml up to maximum 4L. It is hydraulic driven with accrate eletrical control system. MP70FS IML has single stations to increase the production efficiency. Also, it has variety of choice of die heads. With more than 10 years of success in the market, MP70FS IML is updated to be one of the most reliable and popular model in the world.

Advantages:

CLAMPING SYSTEM: HIGHLY DEVELOPED TOGGLE CLAMPING SYSTEM

MP-F Toggle series employs direct-acting clamping system transferring the forces directly to the middle of both of the platens. And it adopts high precision linear guides to provide accurate platen and station movements.

ENERGY SAVING: HIGH STANDARD OF ENERGY SAVING SYSTEM

MP70FS IML is equipped with high standard of energy saving driving systems. All extrusion and hyraulic motors are in IE3/4 energy level. Also, servo energy saving feature can be easily applied.

Machine can keep normal service life only under good conditions.

1.Abide by all notes in this manual strictly.

2. Pay attention to surface cleaning.

3. Check all fasten conponents. Tighten them if they are found loose.

4. Keep enough lubricating of moving surfaces and choose correct lubrication.

5. Rated pressures of all action oil cylinders are 14Mpa. Be careful during

MP70FS
Single station blow molder with horizontal linear mould shuttle
	Length:	3600mm
	Width:	2200mm
	Height	2360mm
Key Data		MP70FS
		mm
Linear mould stroke	A	520
Mould Width	B	500
Mould Length	C	400
Mould Thickness	D	250
Opening Stroke	E	350
Platen daylight	D+E	600
Clamping Force		75kN
Dry Cycle		7 sec.
Centre Distance	1x2 fold	160
	1x3 fold	120
	1x4 fold	100
	1x6 fold	60
Extruder		φ70	φ75	φ80
Screw Speed	r/min	0~65	0~65	0~65
Screw Diameter	mm	70	75	80
Screw L/D Ratio	L/D	24	24	24
Energy Requirements
Extruder Inverter Power	kW	18.5	22	30
Extruder Moter Power	kW	18.5	22	30
Srew Heating Power	kW	12.7	14.4	15.85
Fan Power	kW	0.14X2	0.14X2	0.14X2
Oil pump Motor Power	kW	15	15	15
Total Power of Machine	kW	49.14	54.34	63.79
Air Requirement approx	m3/min	1.2	1.2	1.2
Air Working Pressure	Mpa	0.6-0.8	0.6-0.8	0.6-0.8
Cooling Requirements
Consumption Cooling Water	L/min	40	40	40