Double Station Plastic Bottle Blow Molding Machine MP70D-2 For Corrugation Pipe
High Speed Plastic Bottle Blow Molding Machine MP70D-2 For Plastic Corrugation Pipe Parts
Introduction:
MP70D is specifically designed for making bottles from 50ml up to maximum 5L. It is hydraulic driven with accrate eletrical control system. MP70D has double stations to increase the production efficiency. Also, it has variety of choice of die heads. With more than 10 years of success in the market, MP70D is updated to be one of the most reliable and popular model in the world.
Features
Mould clamping device The function of mould clamping device is to ensure that forming mould can be closed and opened reliably.
Mould clamping device adopts vertical compression, three pilot post, big beam arm,linear guider, cylinder spindle and double working position. Mould moves fast and stably.
It is mainly made up of front plate, middle plate, back plate, synchronous gear rack,puller bolt, mould clamping oil cyliner ,carriger oil cylinder and carriger seat.(for Mp40 model,it adopts two mould platen called left platen and right platen)
When pressurized oil enters mould clamping oil cylinder, piston begins move forward and forces middle plate to move. The connecting synchronous gear rack leads back plate and front plate to move backwards. When mould parting lines meet, pressured oil makes mould close tightly.
| MP70D Double station blow molder with horizontal linear mould shuttle | ||||
| Length: | 3600mm |
|
||
| Width: | 2200mm | |||
| Height | 2360mm | |||
| Key Data | MP70D | |||
| mm | ||||
| Linear mould stroke | A | 450 | ||
| Mould Width | B | 430 | ||
| Mould Length | C | 350 | ||
| Mould Thickness | D | 190 | ||
| Opening Stroke | E | 290 | ||
| Platen daylight | D+E | 480 | ||
| Clamping Force | 75kN | |||
| Dry Cycle | 7 sec. | |||
| Centre Distance | 2x2 fold | 160 | ||
| 2x3 fold | 120 | |||
| 2x4 fold | 100 | |||
| 2x6 fold | 60 | |||
| Extruder | φ70 | φ75 | φ80 | |
| Screw Speed | r/min | 0~65 | 0~65 | 0~65 |
| Screw Diameter | mm | 70 | 75 | 80 |
| Screw L/D Ratio | L/D | 24 | 24 | 24 |
| Energy Requirements | ||||
| Extruder Inverter Power | kW | 18.5 | 22 | 30 |
| Extruder Moter Power | kW | 18.5 | 22 | 30 |
| Srew Heating Power | kW | 12.7 | 14.4 | 15.85 |
| Fan Power | kW | 0.14X2 | 0.14X2 | 0.14X2 |
| Oil pump Motor Power | kW | 9.5 | 9.5 | 9.5 |
| Total Power of Machine | kW | 49.14 | 54.34 | 63.79 |
| Air Requirement approx | m3/min | 1.2 | 1.2 | 1.2 |
| Air Working Pressure | Mpa | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 |
| Cooling Requirements | ||||
| Consumption Cooling Water | L/min | 40 | 40 | 40 |
Standard Features:
Auto Lubrication
Water Cooled Modular Blow Pin
Hot Wire Cutting
Positioning Hole For Quick Mold Change
Adjustable Die head
Linear Transducer
FRL(Filter Regulator Lubricator) for Pneumatic
Proportional Hydraulic System fro better control
Swing and Adjustable Extrusion Platform
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.