T-11 Replaceable Head PU Swab 115mm, Washable High Absorbency for PCB Cleaning
T-11 Replaceable Head PU Swab - 115mm Washable Swab with 5mm x 15mm Head
This T-11 variant is built around a replaceable head. The PU head measures 5mm in width and 15mm in length on a 115mm total length, and it can be pulled off and replaced while the handle goes back to work. For workshops that go through swabs continuously, that means buying heads instead of whole swabs.
The head is also washable. Rinse it, let it dry, and it returns to service with its absorbency intact, which suits repeated cleaning of the same fixture, printer head, or optical surface rather than one-pass wipe-and-discard duty.
What sets it apart from the standard T-11
- Replaceable head. The cleaning head detaches from the handle and can be swapped in seconds, so a worn or contaminated head does not retire the whole tool.
- Washable and reusable. The PU head can be rinsed and air dried for repeat use, cutting consumable consumption on routine maintenance tasks.
- High absorbency. The PU head holds a useful charge of solvent so a single dip covers a larger area, and it lifts residue rather than pushing it around.
- 5mm x 15mm head. Narrow enough for connectors and slots, long enough to cover a flat surface in fewer passes.
- 115mm overall length. Compact enough for benchtop and handheld work; the same footprint as the standard T-11.
- Non-abrasive PU. Cleans solder mask, gold fingers, coated optics, and platen surfaces without scratching.
Specifications
| Parameter | Value |
|---|---|
| Model | T-11 replaceable head |
| Total length | 115mm |
| Head width | 5mm |
| Head length | 15mm |
| Head material | PU |
| Head type | Replaceable, detachable from handle |
| Washable | Yes, rinse and air dry for reuse |
| Absorbency | High |
| Handle material | Polypropylene (PP) |
| Packaging | 100 pcs per bag |
| Place of origin | China |
Typical applications
- PCB conformal coating touch-up and flux residue removal
- Connector, socket, and pin header cleaning
- Printer, plotter, and scanner head maintenance
- Optical module, lens, and sensor housing cleaning
- Fixture, jig, and assembly line maintenance
- General precision cleaning where solvent use is repeated
Ordering and customization
Standard packs ship in 100 pcs per bag. Replacement heads can be supplied separately for customers who want to restock heads without buying handles again. For importers and private labels we can supply neutral or printed bags, adjust pack counts, and combine this swab with other items from our swab and cleanroom wipe ranges in one shipment. Head size and pack configuration are open to discussion for project quantities.
FAQ
The standard T-11 is a one-piece swab with a fixed head. This version has a detachable head that can be replaced, and the head itself is washable for reuse.
Yes.
Yes. Heads can be ordered without handles, which is the cheaper way to keep a bench supplied.
Yes.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.