6%-12.5% Thickness Tolerance Straight and Reducing Seamless Pipe Fitings

Product Description:

Butt Welded tee is belonging to the butt-weld pipe fittings which need to do welding when the pipe fittings need to be connected on the whole pipe line . For the surface of the butt welded tee ends ,we need to do the beveling for the convenience of the welding . The welding angle is usually from 0-37.5 degree . We have carbon steel butt welded tee and alloy steel butt welded tee . Now the factory have different size range and different quality for all kind of clients requirement. So we can meet all requirement of our clients.

Product Show

tee role:

Tee for pipe fitting, pipe connection.Also called pipe fitting tee or tee pipe fitting,

Stainless steel equal diameter tee

Stainless steel equal diameter tee

Tee joint, used at the main branch pipe.

Three - way is with three openings, namely an import, two exports;Or a chemical pipe fitting with two inlet and one outlet, having t-shaped and y-shaped, equal diameter pipe orifice, and reducing pipe orifice, for use at the junction of three identical or different pipelines.The main function of the tee is to change the direction of the fluid.

Appearance test

The three links shall not have cracks, over - burning, overheating and other phenomena exist, the surface should be no hard point.

The inside and outside surface of the tee should be smooth, without destructive strength and appearance defects, such as scar, scratch, heavy skin, etc., after the discovery of defects should be polished, the thinness of the polished place is not less than the standard requirements of the wall thickness, polished place should be smooth and use coloring agent or magnetic powder flaw detection to confirm the removal of defects.

(3) the root of the three-way branch pipe is not allowed to have obvious folds.

(4) any defects on the tee pipe body shall not be allowed to be repaired by welding.

Contact me:

Darcy Dong

Whatsapp/ Wechat: 008615630731167

Guozhong International Limited