Chinese Globe Gate Valve Body AUMA SA Multi-turn Electric Control Valve Actuators with AC Actuators Control Unit
The AUMA SA 07.2 – SA 16.2 multi-turn actuators paired with AUMATIC AC 01.2 controls featuring EtherNet/IP provide a modern, high-speed digital actuator solution for valve automation. The system supports full EtherNet/IP producer-consumer communication with cyclic and acyclic data exchange, enabling real-time monitoring and control in industrial networks. With robust 3-phase AC motor drive and comprehensive local HMI, it offers seamless integration into EtherNet/IP-based DCS while maintaining high reliability for open-close and modulating duties.
- EtherNet/IP Native Support: 100 Mbit/s full-duplex, star topology, RJ45/M12 connectors, explicit and implicit messaging.
- Cyclic I/O Data: 46 bytes input (position, torque, status) and 14 bytes output (commands, setpoint).
- Advanced Diagnostics via Fieldbus: Torque-travel curves, event logging, NAMUR NE 107 signals, and device identification.
- Flexible Control Modes: Open-close, modulating with positioner, and split-range operation; selectable via MODE input.
- Bluetooth Commissioning: Wireless access via AUMA CDT or Assistant App for fast setup without opening the enclosure.
- Robust Integration: Auto-negotiation, auto-crossover, and support for up to 6 acyclic connections.
| Parameter | Details |
|---|---|
| Communication Protocol | EtherNet/IP (IEC 61158 / 61784) |
| Transmission Rate | 100 Mbit/s, full duplex |
| Cable Length | Max. 100 m (Cat. 6A recommended) |
| I/O Assembly Instances | Input: 46 bytes, Output: 14 bytes |
| Power Supply | 3-phase 220–690 V AC, 50/60 Hz |
| Torque Range | 10–1,000 Nm |
| Enclosure | IP68, double-sealed option |
| Operating Temperature | –25 °C to +70 °C (controls) |
| Safety Functions | Safe end position feedback (SFC version) |
Perfect for large-scale process plants with EtherNet/IP backbone networks, such as refineries, power generation, and water/wastewater facilities. Enables centralized valve monitoring, predictive maintenance, and integration with SCADA systems while supporting safety instrumented functions.
- How do I configure the IP address? Use the Windows tool or DHCP; default static IP is 192.168.255.1.
- What data is available cyclically? Position feedback, torque, status signals, and commands (OPEN/STOP/CLOSE/setpoint).
- Can I read torque curves via EtherNet/IP? Yes, via acyclic explicit messages or AUMA CDT software.
- Is local operation still possible? Yes, selector switch allows LOCAL mode independent of fieldbus.
- How to handle network loss? Programmable fallback: stop, go to end position, or last command.
Phone/WeChat/WhatsApp:
+8613916209596
Email: svetama@gbsxj.com
- AUMA AC 01.2 with Profinet or Modbus TCP
- AUMA Assistant App for mobile commissioning
- SAEx .2 explosion-proof actuators
- DMF torque measurement flange
- Wall bracket for separated mounting
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.