Wall Pole Mount FTTH Optical Distribution Enclosure
FTTH Wall/pole mounting 8/16 solid fiber splitter optical distribution enclosure box
Optical Distribution Point with Solid Splitter (ODP Solid) is designed to connect to Feeder / Distribution cable to subscriber’s Drop Cable using PLC Splitter in FTTx networks. ODP has two (2) input ports and 16 output ports on the bottom and it is easy to install on the pole or wall.
Features:
Wall and pole mountable
Up to 16 FTTH drops
Ultra violet resistant and rain resistant
Can accommodate two 1x8 splitters or one 1x16 splitter
2 inlet capacity, 16 outlet capacity
User familiar industry interface, using high impact plastic
Meets cable termination and sealing requirements
Accessaries
| No. |
Name of components |
Quantity | Usage | Remarks |
| 1 | Housing | 1 set | Protecting fiber cable splices in whole |
Internal diameter: 345*293 (mm) |
| 2 | Splitter 1:8 | 8 port adaptor (1PCS) | Terminal optical distribution | 149*140*12(mm) |
| 16 port adaptor (2PCS) | ||||
| 3 | Fiber optic splice tray (FOST) | 1pcs |
Fixing heat shrinkable protective sleeve and holding fibers |
Suitable for: Bunchy:12(cores) |
| 4 | Seal fitting | 1 set | Sealing between FOSC cover and FOSC bottom | |
| 5 | Port plug | 1 pieces | Sealing empty ports | |
| 6 | Pressure testing valve | 1 set | After injecting air it is used for pressure testing and sealing testing | Configuration as per requirement |
| 7 | Grounding lead-out device | 1 set | Cable grounding |
Specification
| Outside dimension (LxWxH) | 345x275x85 (mm) | |
| Weight (excluding outside box) | 2.3(kgs) | |
| Number of inlet/outlet ports | 3 ports on bottom side | |
| Diameter of fiber cable | Φ8—Φ15 (mm) | |
|
Maximum capacity (number of connector ports) |
8 port adaptor | 1 Splitter 1:8 |
| 16 port adaptor | 2 Splitter (2 x 1:8) | |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.