ST Connector 1xN Mechanical Fiber Optic Switch 1m Length

Price Negotiable

Price: Negotiable

MOQ: 10pcs

Delivery Time: 3~5 business days

Brand: UNIFIBER-OEM

Product Description

1xN Mechanical Fiber Optic Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. The mechanical operation offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MMS fiberoptic switches are true switching solutions for optical networking applications.

Features	Applications
Up to 128 channels	Ring network
Low insertion loss	Remote monitoring in optical network
Parallel interface	Testing of fiber optical component
Modularized design
Epoxy free on optical path

Performance Specifications

Parameter	1XN
Insertion Loss(dB)	1＜N≤12	16＜N≤32	32＜N≤64	64＜N≤128
	Type:0.8 Max:1.0	Type:0.8 Max:1.0	Type:1.2 Max:1.5	Type:1.7 Max:2.0
Wavelength Range(nm)	850nm,1260~1620nm
Operating Wavelength(nm)	850/1310/1550/1625
WaveLength Dependent Loss(dB)	≤0.25
Channel Crosstalk(dB)	MM≥35 SM≥55
Return Loss(dB)	MM≥30 SM≥50
Polarization Dependent Loss(dB)	≤0.05
WaveLength Dependent Loss(dB)	≤0.25
Temperature Dependent Loss(dB)	≤0.25
Repeatability(dB)	≤±0.02
Power Supply(V)	5.0 or 12.0
Lifetime(time)	≥10^7
Switch Time(ms)	≤8
Transmission Power(mW)	≤500
Operating Temperature(℃)	-20~+70
Storage Temperature(℃)	-40~+85
Dimension(mm)	1＜N≤12(135×64×32)	12＜N≤16(184×78×36)	16＜N≤32(140×77.5×64)	31＜N≤88(184×156×66)
	88＜N≤128(184×220×66)	&nsbp;	&nsbp;	&nsbp;

1,Specifications may change without notice.

2,Above specification are for device without connector.

DB-9 male connector (max.1x8)

Pin No.	signal Name	I/O	Description
1	D0	Input	TTL,Channel selection bit 0
2	D1	Input	TTL,Channel selection bit 1
3	D2	Input	TTL,Channel selection bit 2
4	D3	Input	TTL,Channel selection bit 3
5	/RESET	Input	TTL,Low level reset to channel 0.Highh leve means channel selection bits are effective.
6	/READY	Onput	TTL,Ready(High=Not ready,Low=Ready).
7	ERROR	Onput	TTL,Error(High=Error,Low=Not error).
8	GND	Input	Ground
9	+5VDC	Input	5.0±5% VDC Power Supply(max 550mA)

Channel Selection Table

Max Channel	Input								Active Channel
Max Channel	/RESET	D6	D5	D4	D3	D2	D1	D0	Active Channel
N=16	0	x	x	x	x	x	x	x	0 reset
	1	x	x	x	0	0	0	0	com → 1
		x	x	x	0	0	0	1	com → 2
		x	x	x	0	0	1	0	com → 3
		x	x	x	···	···	···	···	···
		x	x	x	1	1	1	1	com → 16