FTTH Transparent Adhesive Invisible G657B3 Fiber Cable SC/UPC to SC/UPC

Invisible optical cable is the abbreviation for transparent tight-buffered optical cable covered with hot melt glue. It is an
optical cable composed of G.657.B3 or G657A optical fiber, a transparent tight jacket layer. Each layer is extruded step by step using an extrusion process. The application of invisible optical cable is where the user does not accept the use of leather fiber optic cable to enter the home or solves the problem of the user's difficulty in entering the home, especially in the old residential area and office. The fiber has a minimum bending radius. When laying, there is no need to nail, make brackets, perforate, pipes, etc., to destroy the original indoor structure, or because of the discontinuity of the laying, the optical cable will sag and fall off and other safety hazards. At the same time, the optical cable is almost transparent so it will not affect the indoor decoration, simple construction method, only need hand-held heating installation tools to complete the laying project.

Features:

-- Tight weld layers are not isolated, almost transparent.
-- Outer surface is smooth, no visual visible holes, scars and other defects.
-- The minimum bend radius of 5mm, the room is not dead laying.
-- Handheld laying tool that uses no complicated wiring, convenient

Invisible Fiber cable Optic Fiber Cable
The outer diameter:1.1 mm
The outer diameter of Tight outer cover:0.8 mm,
Hot melt adhesive thickness:0.15 mm
Chromatogram: Colorless and Transparent
Any cross-section of invisible cable should be uniform, without pores or blemishes. Besides ,its outer surface is smooth, no obvious defects such as cracks other.
Installation temperature range:-30℃~50℃ ( -22℉~122℉)
Using temperature range:-40℃~75℃ (-40℉~167℉)

Specification:

Cable cross-sectional view and Hand-held heating installation tool figure

Figure 1 Cable cross-sectional view

Figure 2 Hand-held heating installation tool