Double Door Sintering Furnace Automatic Safety Interlock Function

Price Negotiable

Price: Negotiable

MOQ: 1 set

Delivery Time: 5-8 months

Brand: Ruideer

Product Description

Technical parameters

Valid working space	Customizable
Max design pressure	10-100bar
Pressure time	It takes no more than 25 min to reach 58 bar.
Cooling time (full load)	Cooling time for sintering Temperature 1450℃～100℃: 7-8h (WaterTemperature≤30℃, 55bar≤pressure≤58bar)
Max.loading weight	The load capacity depends on the product type)
Power rating	About 400KVA (The output power can be limited)
Service life for furnace shell	20 years
Operating times for furnace shell	6000 furnaces
Max. Design Temperature	1600℃(while vacuum sintering)
Max. Working Temperature	1550℃(vacuum and pressuring)
Pumping speed	The vacuum degree can reach 5Pa within 30min after starting the pump. After reaching 5Pa and then pumping for 60min, the ultimate vacuum value reaches 1Pa (within a cold, empty and clean furnace that has been dried before).
Leakage rate	≤3Pa/h (stop the pump group operation and start checking after testing the limit vacuum (within a cold, empty and clean furnace that has been dried before).
Wax yield rate	≥98%(10Kg pure paraffin, argon negative pressure dewaxing. Measured by three times of mean values at most).
UPS guarantee time	It can power the indicator light and control the furnace during power outage for more than 80 minutes.
Max.heating rate	8℃/min (the room temperature rises to 1900℃within a vacuum and empty furnace. 600℃, 1000℃, 1200℃ half-way insulation is allowed).