PLC Smt Assembly Equipment Semiautomatic Solder Paste Pritner Stencil Printer

C-3270 Semiautomatic Solder Paste Pritner

Features  

1. Adoption of Japanese high-precision motor and linear orbit can improve steadiness of squeegee printing.
2. The pressure of double-squeegee printing and the up/down motion of squeegee can be adjusted separately with printing head and throttle behind small air cylinder for fear of resonant vibrations.
3. Total Input Power & Voltage: single-phase 220V 50/60Hz, and total power: 100W.
4. The print head can be lifted up in inclination of 45° to facilitate installation and uninstallation of squeegee and cleaning of steel mesh.
5. The print head can be moved along and fastened to make easier location of steel mesh and have a better printing effect.
6. The mesh arms can be adjusted separately on the left and right, suitable for the printing range of 470 - 750mm.
7. The combined printing table is designed with relaining key and positioned PIN, applicable to operation of single-sided base plate and two-sided base plate.
8. In the plate-proofreading method, adoption of mesh arm with proofreading and adjustment of printed matter (bedplate) X, Y and Z makes proofreading easier and simpler.
9. Adoption of computerized PLC empowered with human-computer interface brings you many options including single/double printing and manual/auto modes.
10. The squeegee seat can be adjusted fore and aft, and squeegee blade can be adjusted in the inclination of ±15° as required in printing.
11. Application of SMC pneumatic cylinder and magnetic proximity switch can make work table move to and fro and the precision of printing surface to ±0.01mm.
12. Configuration of auto numeration and alarm frequency setup facilitate output statistics.
13. The printing dead time can be adjusted so as to meet production demand.

Specifications