Total Station Water Damage Emergency Recovery Internal Corrosion Restoration Service 24 Hour Intake
Total Station Water Damage Emergency Recovery & Restoration Service
Water ingress is one of the most devastating events for a precision survey instrument. Whether from sudden rain, accidental submersion, or prolonged humidity exposure, water damage can destroy sensitive electronics within hours if not addressed immediately. Our emergency water damage recovery service is designed for rapid response — we accept instruments 24 hours a day and begin the critical first-stage drying process immediately upon receipt. Our multi-stage restoration process maximizes the chance of full instrument recovery at a fraction of replacement cost.
Emergency Recovery Process
- Stage 1 — Immediate Triage (Hours 0-2) — Battery removal, full instrument disassembly, initial moisture assessment and photographic documentation
- Stage 2 — Ultrasonic PCB Cleaning (Hours 2-6) — All circuit boards undergo ultrasonic cleaning with electronics-grade solvent to remove corrosive contaminants
- Stage 3 — Corrosion Neutralization (Hours 6-12) — Chemical treatment of corroded contacts, connectors, and traces to halt ongoing electrochemical damage
- Stage 4 — Controlled Drying (Hours 12-48) — Vacuum drying chamber with precise temperature and humidity control for complete moisture removal
- Stage 5 — Component-Level Repair (Days 3-7) — Replacement of damaged components (corroded connectors, oxidized contacts, failed ICs) on affected PCBs
- Stage 6 — Reassembly & Calibration (Days 7-10) — Full reassembly with fresh seals and gaskets, followed by complete functional testing and calibration
- Stage 7 — Extended Burn-In Test (Days 10-15) — 48-hour continuous operation test to ensure long-term reliability after restoration
Why Choose Our Water Damage Recovery
- 24-Hour Emergency Intake — We accept water-damaged instruments at any time because every hour counts after water exposure
- Over 85% Recovery Rate — When received within 72 hours of water exposure, we successfully restore over 85% of instruments to full functionality
- Complete Transparency — You receive a detailed photo report showing all corrosion and damage found, plus our recommended recovery plan
- Insurance Documentation — We provide comprehensive damage assessment reports suitable for insurance claims
- No Recovery, No Charge — If the instrument cannot be restored, you pay only shipping — no diagnostic fee
Service Specifications
| Parameter | Value |
|---|---|
| Service Type | Water Damage Emergency Recovery & Corrosion Restoration |
| Supported Instruments | Total Stations, Digital Levels, Theodolites, GNSS Receivers |
| Supported Brands | Leica, Trimble, Topcon, Sokkia, Nikon, Pentax, Spectra Precision |
| Drying Method | Controlled Temperature Vacuum Chamber |
| Cleaning Method | Ultrasonic PCB Cleaning with Electronics-Grade Solvent |
| Recovery Success Rate | >85% (within 72 hours), >60% (within 1 week) |
| Emergency Intake | Available 24 Hours, 7 Days |
| Repair Warranty | 6 Months on Water Damage Recovery |
| Turnaround Time | 7-15 Working Days |
Frequently Asked Questions
Q: What should I do immediately after water exposure?
A: Remove the battery IMMEDIATELY — do not attempt to power on the instrument. Remove any external water with a dry cloth. Do not use a hair dryer or heat gun. Place the instrument in a sealed bag with silica gel packets and contact us for emergency intake.
Q: Can saltwater-damaged instruments be recovered?
A: Saltwater is significantly more corrosive than freshwater. Recovery is possible if treated within 24 hours. After 48 hours, permanent damage to internal components is likely. Contact us immediately for assessment.
Q: How long does water damage recovery take?
A: The complete process takes 7-15 working days. The extended timeline ensures thorough drying and proper burn-in testing. Rushed recovery often leads to future failures.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.