1. The calcium powder required in the board formula can be increased up to 50%-250% and the required amount of the auxiliary material decreased by 30%.
 

2. The most widespread use of WPC is in outdoor deck floors, but it is also used for railings, fences, landscaping timbers, cladding and siding, park benches, molding and trim, window and door frames, and indoor furniture.
 

3. Laser tracking eliminates problems regarding the extrusion flow rate, which helps achieve automation of the entire extrusion process.
 

4. Through the use of a PID controller, the WPC profile extrusion machine provides an automatic alarm in case of a problem with any component.

Wood-plastic products is as a substitute for traditional wood products, greatly reduce the demand for wood. According to the demand, Acemech specially designed the calibration forming technology for PVC wood plastic foam, low foam / no foam and cold push solution for PE/PP wood plastic. To pursue a longer using life of wood products, the surface of WPC products with a protective layer through coextrusion technology comes into being. In addition, we are devote to the provision of the turn-key solution, including upstream machine, such as wood crusher, pulverizer and drying equipment, WPC compsite mixing & pelletizing system, and downstream, such as embossing, brushing, sanding, lamination, hot stampting transfer, printing, Waste crushing, grinding and recycling equipment for different wide products.