Paper Pulp Hand Sheet Former BN-8053-01A Automatic Pulp Sheet Former

Laboratory Rapid Koethen Paper Handsheet Maker Rapid Koethen Automatic Pulp Hand Sheet Former

Automatic Pulp Handsheet Former Handsheet Maker, Pulp Handsheet Former

Forming part

Sample diameter: round, Φ less than 200mm, square and other sizes to be customized.
Molding material: special aluminum composite metal materials
Molding weight range: the minimum molding weight 20g, the maximum thickness can be achieved about 20mm sheet material
Body weight and thickness according to the type of fiber may be. Evenness index: uniformity of 40 to 110, depending on the specific circumstances of different fiber types and beating degrees
Mesh selection: 80/100/120/200/300/400/500 comes standard with one of the mesh, according to different fiber characteristics
High pressure dewatering control system: equipped with high pressure anti-suction high vacuum system
Forming mesh diameter: Φ257mm
Net fixture material: 304 # stainless steel
Discharge network material: pure bronze
Discharge efficiency: 0.7 / 4h / cm2
Three layers of filter layer: 314-397-363cm2

Vacuum part
Vacuum method: fully enclosed rep semi-enclosed water-sealed vacuum pump components, strong increase in vacuum strength
Vacuum channel: 5-3 high-strength vacuum channel, to achieve multi-channel high-flow vacuum dehydration
Vacuum tube: vacuum tube with high temperature, high pressure, high physical strength of Teflon pipe
Vacuum cycle protection: with vacuum plug protection device
Dry vacuum: maximum vacuum -0.09Mpa, ultimate vacuum -0.1Mpa
Suction vacuum: maximum vacuum -0.09Mpa, ultimate vacuum -0.1Mpa

Dry part
Vacuum pressure plate: special aluminum composite metal materials
Exhaust pore size: Φ3mm
Heating method: disc heat, to ensure uniform temperature uniformity to achieve the purpose of uniform heating.
Drying temperature: room temperature ~ 120 ° C Promise adjustable
Drying time: 1 ~ 99.99min adjustable
Drying station: 2 drying stations
Drying efficiency: 0.7 / 4h / cm2
Vacuum Seal Cover: Pure silicone cover
Sealing ring: pure silicon seal
Drying method: two drying methods
Dry thickness: a thickness of 15mm, two thickness 25mm

Sealing device
Sealing ring: pure silicone seal, W9mm, H4mm

Afterburner:
Handle lever 120mm, handle diameter Φ3mm, shaft size Φ40mm * 40mm,
With a circular V-shaped eccentric energizing device, the entire afterburner is made of 304 stainless steel.

Water circulation part
Water cycle: one-button water circulation system
White water cycle: equipped with white water circulation system
Manual water supply: equipped with manual water window 10 * 16mm
Discharge system: one-button drainage system, equipped with intelligent angle valve discharge function
White water tank structure: integrated white water cycle, and vacuum pool Siamese, water communication, all 304 stainless steel.
Heating power: 1.6kw × 2 groups, vacuum pump motor power: 0.25kw × 2 group, the total power of about 4kw
Dimensions: 1500mm × 800mm × 1450mm
Power: 220v, 50Hz