Coagulant Auxiliary Agent Poly Aluminium Chloride PAC 30% Applied in Chemical Factory Wastewater Treatment
Description:
Product Overview
LANSEN PAC is a spray-dried polyaluminum chloride (PAC) manifested as a pale yellow powdered substance. It is manufactured from high-purity aluminum hydroxide [Al(OH)₃] adhering to food-grade specifications. As a key inorganic coagulant relying on trivalent aluminum ions (Al³⁺), it has been accredited with the NSF/ANSI Standard 60 for the application in drinking water treatment. Moreover, it serves a dual purpose as a retention agent in the papermaking industry and a flocculating agent for the purification of wastewater and swimming pool water.
Technical Advantages
Sophisticated Coagulation Mechanism
Through the combination of hydroxyl bridging and polyanionic polymerization processes, LANSEN PAC generates highly charged inorganic macromolecular structures. This gives it a distinct edge in achieving much higher coagulation efficiency than conventional alum or ferric salt coagulants.
It produces larger and more compact flocs, which not only promote rapid sedimentation but also lead to a substantial reduction in the volume of sludge formed.
Extensive Operational Flexibility
LANSEN PAC remains effective across a pH spectrum ranging from 4.0 to 9.0. Consequently, in the majority of practical scenarios, there is no need for additional pH adjustment.
It showcases remarkable performance under difficult conditions, including:
Surface water heavily infested with algae.
Raw water characterized by low temperatures (below 5°C) and low turbidity levels (less than 10 NTU).
Water with mild contamination (having a Chemical Oxygen Demand, COD, of less than 100 mg/L).
It also exhibits an enhanced proficiency in eliminating turbidity from water with high turbidity (exceeding 1000 NTU).
Industrial Competitiveness in Efficiency
The required dosage of LANSEN PAC can be cut down by 30 to 50 percent when juxtaposed with that of traditional coagulants, thereby substantially reducing the operational expenses.
The residual aluminum content in LANSEN PAC is incredibly low (less than 0.1 ppm), guaranteeing full compliance with the drinking water standards established by the World Health Organization (WHO).
![]()
![]()
![]()
-
-
It facilitates the swift formation of substantial flocs and enables prompt sedimentation.
It demonstrates outstanding adaptability to water at different temperatures and dissolves well.
This product features mild corrosiveness and is well-suited for automated dosing, which ensures convenient operation.
Specifications:
| Product Code |
Drying Method |
Appearance |
AI2O3% |
Basicity |
Insoluble Substance % |
| PAC LS 01 |
Spray dry |
White or pale yellow powder |
≥29.0
|
40.6-60.0 |
≤0.6
|
| PAC LS 02 |
Spray dry |
Light yellow or yellow powder |
≥29.0 |
60.5-85.0 |
≤0.6
|
| PAC LS 04 |
Spray dry |
Dark yellow |
≥28.0 |
60.5-85.0 |
≤1.5
|
| PAC LD 01 |
Drum dry |
Yellow to brown powder |
≥29.0 |
60.9-90.0 |
≤1.0
|
| PAC LS 10 |
/ |
Colorless transparent liquid |
9.5-10.5 |
38-60 |
/ |
| PAC LS 15 |
/ |
Light yellow transparent liquid |
14.5-15.5 |
38-60 |
/ |
Instruction for use:
For solid products, dilution is required before dosing. The typical dilution ratio ranges from 2% to 20% (by weight).
The exact dosage should be determined based on flocculation tests and trials conducted by the user.
Package and strorage:
The product is packed in 25kg woven bag with inner plastic bag
The product should be stored in a dry and ventilated place.
Shelf life:12 months
![]()
![]()
![]()
![]()
![]()
![]()
![]()
