Horizontal Gas Carburising Furnace High Temperture Heating 300KG Weight
300KG High Temperture Heating Horizontal Electric Carburize Oven
Resistance Wire Heating
Horizontal Electric Carburize Oven introduction:
The rotary heat treatment furnace is mainly used for normalizing, annealing, cabro-nitriding, and tempering of small round parts such as chain sheets, self-drilling screws. It has following advantages:
1 . Compact structure, small footprint and high productivity;
2 . Uniform heating to improve the quality of heat treatment;
3 . There are a variety of spare pipe joints for various chemical heat treatments;
4 . The furnace body can be tilted and it is convenient to load and discharge.
Carburizing Furnace Features:
1. This furnace is heated by resistance,controlled by solid state relay and intelligent instrument of Japan conductive company,and using PID adjusting method,has the advantages of accurate temperature control,simple operation,stable performance.
2. Working zone uses sealed cylinder-shaped chamber furnace made of imported high temperature stainless steel,it rotates automatically after the workpieces are putting into the furnace chamber to make the workpieces be heated uniformly.It can also be passed into various gas to meet various technological requirements of workpieces.
3. The furnace body is supported by a bracket,can tilt upward or downward under the control of tilt unit,and can discharge automatically when it's tilting downward.
Technical parameters of SP-RG120-9 Tiltable Roller Retort Carburizing Furnace
| 1. Working power supply | AC/3-phase 4-wire/380-440V/50/60Hz |
| 2. Rated power | 120Kw |
| 3. Rated temperature | 950°C |
| 4. Temperature control way | PID power regulation,instrument of Japan conductive company |
| 5. Temperature accuracy | ±1°C |
| 6. Temperature uniformity | ±5°C |
| 7. Heating element | 0Cr25Al5Fe+Cr resistance wire,spiral |
| 8. Heating element connection | Y |
| 9. Dimensions of Effective work zone | Diameter * length=750*680mm |
| 10. load capacity of 1 batch | 300Kg |
| 11. Operating motor of Furnace chamber | 1 set ,1.5Kw,adjust speed by magnetic |
| 12. Rotating speed | 0.5-8 r/min |
| 13. Tilting motor of furnace body | 0.55KW Hand/electric (all in one) speed reduction unit |
| 14. Max Tilting Angle of furnace body | +/-50 degree |
| 15. No-load power loss | Less than 4KW |
| 16. No-load heating time(Normal Temp:950°C) | About 2.5 hours |
standard model of SUPER carburizing furnace:
| Model | Furnace chamber size | Rated power | Rated temperature | Phase | Rated voltage |
| RG-30-9 | D300×L620 mm | 30 kw | 950 degree celcius | 3 | 380-440V |
| RG-45-9 | D520×L680 mm | 45 kw | 950 degree celcius | 3 | 380-440V |
| RG-60-9 | D600×L750 mm | 60 kw | 950 degree celcius | 3 | 380-440V |
| RG-120-9 | D750×L1000 mm | 120 kw | 950 degree celcius | 3 | 380-440V |
Before sales:
1. Prompt Response (< 12hours).
2. 24 hours technical consultant service
3. Full Support in living and touring in China while customer visiting the factory.
After sales:
1. Prompt Response (< 12hours).
2. One - One customer service with duration over 5 years.
3. Engineers available to service machinery overseas.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.