UHP700 Carbon Graphite Rod For Electric Arc Furnace electrodes
UHP700 Carbon Graphite Rod For Electric Arc Furnace Electrodes
Instructions of usage for Carbon Graphite Rod:
Notes of usage:
1.To Place the nipples, first use compressed air to clean the hole, then carefully screwed the nipples into it (do not damage the
thread).
2.To connect the electrodes, when there's 20-30mm distance between the two electrodes, using compressed air to clean the two
extremes.
3.Connector locations should be selected c-map.
4.When use the wrenches to connect electrodes, should be fully tighten to specified torque.
5.To avoid electrode broken, please remove the insulating material in the furnace.
700UHP Carbon Graphite Rod Properties
| Nipple | |||||
| Nipple | AD | SPR | MOR | MOE | CTE//cmcmC |
| (gm/cc) | (ohm Micro mtr) | (Nmm2) | ( kg/mm2) | x10-7(0-50℃) | |
| g/cm3 | µΩ.m | MPa | GPa | 10-6/℃ | |
| (100-600℃) | |||||
| MAX | 1.86 | 3.6 | 27 | 16 | 1.1 |
| MIN | 1.8 | 3.2 | 23 | 17.5 | 0.98 |
| Pole | |||||
| Electrode | AD | SPR | MOR | MOE | CTE//cmcmC |
| (gm/cc) | (ohm Micro mtr) | (Nmm2) | ( kg/mm2) | x10-7(0-50℃) | |
| g/cm3 | µΩ.m | MPa | GPa | 10-6/℃ | |
| (100-600℃) | |||||
| MAX | 1.74 | 5 | 12 | 10.5 | 1.25 |
| MIN | 1.70 | 4.2 | 9.5 | 9 | 1.15 |
General Properties of Carbon Graphite Rod :
| Item | Unit | UHP | HP | RP | UHP Nipple | HP Nipple | |||
| 450-500mm | 550-700mm | 450-500mm | 550-700mm | 400-450mm | 500-700mm | ||||
| Bulk Density | g/cm3 | 1.66-1.73 | 1.68-1.75 | 1.60-1.70 | 1.62-1.72 | 1.55-1.65 | 1.54-1.64 | 1.80-1.85 | 1.72-1.80 |
| Resistivity | μΩm | 4.8-6.0 | 4.2-5.0 | 5.2-7.5 | 5.5-7.2 | 7.5-9.0 | 8.0-9.5 | 3.0-4.3 | 4.0-6.0 |
| Flexual Strength | MPa | 10.5-15.0 | 10.0-14.0 | 10.5-14.5 | 9.0-13.5 | 8.0-11.0 | 7.0-10.0 | 20.0-30.0 | 18.0-25.0 |
| Elastic Modulus | GPa | 8.0-10.0 | 8.0-12.0 | 6.0-9.3 | 16.0-20.0 | 12.0-16.0 | |||
| CTE (30-600) | 10-6/℃ | ≤1.5 | ≤2.2 | ≤2.8 | ≤1.3 | ≤2.0 | |||
| Ash Content | % | ≤0.3 | ≤0.3 | ≤0.5 | ≤0.3 | ≤0.3 | |||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.