Round Rain Pipe Roll Forming Machine | Steel Downspout Production Equipment

Roll Forming machine for Production of Roof Drainpipe System

Downspout is a round rain pipe for conveying rain water from a roof or gutter to the ground. Our roll forming Machine of round downspout machines can run copper, steel, or aluminum for production various sizes round pipes.

This downspout roll forming machine is special for manufacturing various size Round downspout for roofing rain system, this pipe is also named as rainspout, round downspout pipe. It is used for resident building or commercial building. Downspout is a pipe for conveying rain water from a roof or gutter to the ground or to a drain, also referred to as Leader pipe, Down-pipe or Drains-pout. The downspouts are more and more widely applied in rain water storage solution.

Totally there have two machines for this rain downpipe production solution, the roll forming machine for production straight rain downpipe, and another machine named Downspout Crimpers for production rain pipe elbow.

Round downspout Machine Components

Round Downspout Roll Forming machine is consisted of de-coiler, material feeding device, main roll forming machine, tracing cutting device, run-out table, electrical control system.

Round Downspout Pipe Roll Forming Machine Main Parameters (Φ100)

We can supply customer two style downspout pipe machines, inner locking and out locking style down pipe machine. Different size downspout from 50mm to 100mm, plain round downspout or corrugated round downspout is optional.

Round downspout Applications

The downspouts are more and more widely applied in rain water storage solution. Downspout disconnection (sometimes called roof leader disconnection) represents a cost-effective on-site alternative for reducing the volume and cost of stormwater that requires public management. Runoff from residential rooftops is collected by eaves troughs, which are installed along the edge of the roofline. Water collected in the eaves trough is conveyed to ground level by one or more downspouts. Downspouts may then connect directly into the storm sewer system into a combined storm and sanitary sewer system. Disconnecting downspouts brings a number of economic and environmental benefits to the municipality and the homeowner.

Material Specification and Sizes
Profile	BMT (mm)	Tensile (MPa)	Size (mm)	Roof Area Drained (m²)
	0.40 and 0.50	G300	50	30
			65	45
			75	65
			90	90
			100	115
			125	170
			150	250
			175*	345
			200*	450
			225*	570