Stainless steel ATM encryption keyboard, embedded security chip USB interface

1.Introduction

P7 is designed and manufactured in accordance with the top-level industrial security chip standards, and fully compliance with the highest level of domestic and international financial security certification requirements. With the intrusion detection mechanism-drilling-resistant (intrusion), anti-disassemble, replacement -proof etc., it can make the user's password much safer. This product can be widely used in finance, telecommunications, national defense and other fields; it can also prevent illegal attacker tampering user's information.

2.Physical Feature

2.1 Size

• Dimensions:

  • L×W×H: 176 mm×121.5mm×31mm

P7 Drawing

2.2 Processor and memory

        Processor:

        ARM® Cortex® M3 Processor Core

        60MHz Core Operating Frequency Through PLL 


        Memory:

        Code Space: 512 Kbytes

        Data Space: 96 Kbytes

2.3 Connector

         USB connector

P7 adopt standard “B” receptacle for USB interface.

P7 is a Bus-powered Full-Speed USB2.0-compliant device. Maximum current consumption requirement of the EPP is 500mA using this interface.

USB Connector Termination Assignment as below:

           FDK connector

P7 provide a FDK connector to support an 8-key function keypad. The connector is from ZEQAN-TECH (Product code: A2023-2X05A).

3.Product Feature

3.1 Environmental characteristics

        Power supply:4.0V~5.50V,500mA (USB bus power)

       Operating temperature range:-25°C ~ +65°C

       Storage temperature range:-30°C ~ +70°C

       Transport temperature range: -30°C ~ +70°C

       Operating Relative humidity: 5% ~ 95% r.h. non-condensing

       Storage Relative humidity: 5% ~ 98% r.h. non-condensing

       Transport Relative humidity: 5% ~ 98% r.h. non-condensing

       Max Operating Altitude: 3000 meters

3.2 Test and Certifications

         Water spray/dust Protection: IP65

         RoHS Compliance

         MTBF: Min.100,000hours with 100,000 transactions per year

         EMI/EMP EN55032/A for Emissions

EN55024 for Immunity

IEC61000-4-2 Level 4 for ESD (Contact: ±8KV; Air: ±15KV)

IEC/EN 61000-4-4 Retail: 3 for Burst (2kV on power lines, 1kV on data lines)

        Certifications:

                              CE

                              CB

                              PCI 4.X

                              PTS2.X

                              GUOMI

3.3 Keystroke performance

       Remove Switch force: 2.5N±0.4

       Numerical Keys force: 3.5N±0.7(Center); 2.5N±0.5(Edge)

       Function Keys force: 7.0N±1.0(Center); 3.0N±0.5(Long Edge)

       Life of Keys: 2,000,000 cycles minimum@5N

3.4 Battery performance

       Battery life@25ºC(without load):>10 years

       Battery life@25ºC(with load):>5 years

4.Software Feature

4.1 Pin block format

        IBM 3624

        ANSI

        ISO0

        ISO1

        ISO3

4.2 Firmware update

Support authenticated firmware updated and remain device configuration and key value.

4.3 Algorithm

        DES/TDES encrypt/decryption(ECB/CBC)

       SM2 key pair generated

       SM2 encrypt/decryption

       SM2 sign/verify

       SM3 hash

       SM4 encrypt/decryption(ECB/CBC)

       DES/TDES/SM4 MAC calculation

4.4 Authorized removal detection

4.5 Random data generation

4.6 Keypad layout modification

4.7 Plaintext entry/PIN entry

4.8 Password entry/Terminal master key entry

4.9 Support XFS 3.3(Extensions for Financial Services)

4.10 Support device status diagnosis using indicator light

4.11 Software environment

Running in WINXP and WIN7 all edition, and recognized as a HID(Human Interface Device) device.