3.8kw Pool Water Pump , Spa Pool Pump For Water Park Filtration System
Water Park Filtration System Swimming Pool Water Pump 3.8KW Water Pump for Pool
| Model | Voltage | HZ | Power (KW) | Power (HP) | Hmax (m) | Qmax (m³/h) | Port Size (inch/mm) |
| FN-150 | 220V-240V | 50 | 1.1 | 1.5 | 18 | 35 | 2.0/63 |
| FN-200 | 220V-240V | 50 | 1.5 | 2 | 18 | 35 | 2.0/63 |
| FN-300 | 220V-240V | 50 | 2.2 | 3 | 20 | 40 | 2.0/63 |
| FN-400 | 220V-240V | 50 | 3 | 4 | 20 | 43 | 2.5/75 |
| FN-500 | 380V | 50 | 3.8 | 5 | 21 | 50 | 2.5/75 |
| FN-550 | 380V | 50 | 4 | 5.5 | 22 | 60 | 2.5/75 |
| FN-750 | 380V | 50 | 5.5 | 7.5 | 22 | 75 | 2.5/75 |
Features:
PUMP MOUNT MUST
Ÿ Be solid Level Rigid Vibration Free.
Ÿ Allow use of short, direct suction pipe. (To reduce friction losses & don’t install the pump more
than 3M geometrical height from water level)
Ÿ Allow for gate valves in suction and discharge piping.
Ÿ Have adequate floor drainage to prevent flooding.
Ÿ Be protected from excess moisture.
Ÿ All adequate access for servicing pump and piping.
NEVER run pump dry! Running pump dry may damage seals, causing leakage and flooding! Fill
pump with water before starting motor.
Before removing lid:
STOP PUMP before proceeding.
CLOSE GATE VALVES in suction and discharge pipes.
RELEASE ALL PRESSURE from pump and piping system.
Description:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.