Water Pump Bottom Pumping Anti Dry Burning for Pond/Aquarium/Hydroponic System

Paramerter:

Warning:

Risk of electric shock is certain that it is connected only to properly grounding-type receptacle.

Do not connect to any voltage other than that shown on the pump.

Do not pump flammable liquids

To reduce the risk of electrical shock, use only on portable self-contained fountains no larger than 5 feet in any dimension.

Do not use with water above 35C (95F).

Operate pump completely submerged for proper cooling.

Not for swimming pool.

Our Advantages:

• [Power and Flow Rate]7 models, different sizes, different flow rates, different power cords, different weights, you can choose the right size for you. Great suction, applied to fish tank, pond, garden fountain, flowing water crafts and hydroponic systems, etc
• [Low Water Level Pumping]low water level design, pumping water as low as 2cm, ensuring cleaner pumping. 360° surrounds the water, and the bottom is surrounded by water, leaving no fish manure! In addition, you can fill the pump with water and then leave the pool to use it
• [Dry burning protection]The thermal protection chip inside is intelligent to prevent dry burning. No need to worry about there is not enough or no water in your fish tank when out for a short trip
• [Perfect Motor & Low Noise]Running at a whisper-quiet level, The motor inside produces no noise, which gives you a quiet environment even with one in your bedroom. 4 strong suction cups at the bottom of the pump help keep it in place
• [Durable Quality]The impeller shaft is Ceramic, longer life than stainless steel shafts. High-strength wear-resistant rotor, acid and alkali resistance. Epoxy Resin Encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts. Can be used in salt or fresh water.

Use And Maintenance:

In order to ensure safety, all products are strictly inspected and tested, please according to the instructions for operation in case pumps are destroyed.

1. There is inside the pump or dirt into obstacles will reduce the effect of use of the product, if the pumps, pump out dirty cleaning of dirt.

2. Clean water pump, remove the front cover and waterleaf, with little brush or water, dirt, don't move pump shaft.

If the pump does not operate, according to the following verification:

1. Check whether the circuit is damaged, for another input to ensure that the pump power;

2. Ensure that the inlet without dirt;

3. Take out the rotor to ensure that the rotor is not damaged or blocked.

Attention:

1. Please power off before use;

2. Please don't burn;

3. Do not directly use the power line to pick up the pump;

4. Do not operate in hot water;

5. Work in clear water