Pond Fountain Submersible Water Pump

1,Use in / under water or outside

2,The water pump uses the latest three-phase power with brushless and sensorless control technology, which saves up to 60% energy.

3,Using closed impeller designs can be economically efficient to improve lift and performance.

4,Quiet, suitable for fresh and sea water.

5,Ceramic shaft, wear resistance, no rust.

6,The outlet realize multi-stage over connection suitable for a variety of pipe diameters.

Warning

1. For your own safety, please contact an electrical specialist if you have any questions or problems!
2. Do not connect the power supply if all parts are not installed.
3. Do not use the pump in water temperatures above 35 ° C.
4. Only connect the pump to a power supply with ground contact. This type of outlet must be set up in accordance with the relevant national guidelines (vde.en ... iec etc.) to ensure that the ladder extends to the pump.
5. When connecting to the power supply, pay attention to the voltage indicated on the.
6. Electrical systems on garden ponds must comply with international and national installation guidelines.
7. Only operate the pump when nobody is in the water!
8. Never lift / carry the pump by the cable.
9. The pump must not be operated if the cable or the housing is defective!
10. Never displace liquids other than water.
11. Warning: the pump will automatically stop working if it is overloaded or without water.