China Realtek Chipset 1GE CATV FTTH ONU Designed AS HGU Support IPv4 IPv6 Dual Stack FTTH ONU for sale

Realtek Chipset 1GE CATV FTTH ONU Designed AS HGU Support IPv4 IPv6 Dual Stack FTTH ONU

Price Negotiable

Price: Negotiable

MOQ: 10pcs

Delivery Time: 5 work days

Brand: JiZhong

Product Description

Realtek Chipset 1GE CATV FTTH ONU Designed AS HGU Support IPv4 IPv6 dual stack FTTH ONU

Model NO:JZ-CX0101R001

Product Description:
* 1GE + CATV is designed as HGU in different FTTH solutions, carrier-class, FTTH application provides data service access; * 1GE+CATV is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. * 1GE+CATV adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0. * 1GE+CATV is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah; * 1GE+CATV is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah; * 1GE+CATV is designed by Realtek chipset 9601D;
Key Features:
Supports Dual Mode (can access GPON/EPON OLT). Supports SFU and HGU of EPON CTC 3.0 standard Supports GPON G.984/G.988 standards Support CATV interface for Video Service and remote control by Major OLT Support NAT, Firewall function. Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect Support port mode of VLAN configuration Support LAN IP and DHCP Server configuration Support WEB Management Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode Support IPv4/IPv6 dual stack Support IGMP transparent/snooping/proxy In compliant with IEEE802.3ah standard Compatible with popular OLT (HW, ZTE, FiberHome...)
Technical Parameters:
Technical Item	Parameters
PON interface	1 GPON/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm, Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM
LAN interface	10/100/1000Mbps auto adaptive Ethernet interfaces. 10/100/1000M Full/Half, RJ45 connector
CATV Interface	RF, optical power : +2~-18dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 82dBuV(-7dBm optical input) AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm)
LED	6 LED, For Status of POWER, LOS, PON, LAN, NORMAL, WARN
Push-Button	2, for Function of Power on/off, Reset
Operating condition	Temperature : 0℃～50℃ Humidity :10%～90%(non-condensing)
Storing Condition	Temperature : -40℃～+60℃ Humidity :10%～90%(non-condensing)
Power supply	DC 12V/1A
Power Consumption	<3W
Net Weight	<0.2kg
Picture display of FTTH ONU:

Panel lights and Introduction:

Pilot	Status	Description
POWER	On	The device is powered up.
POWER	Off	The device is powered down.
LOS	Blink	The device doses not receive optical signals.
LOS	Off	The device has received optical signal.
PON	On	The device has registered to the PON system.
	Blink	The device is registering the PON system.
	Off	The device registration is incorrect.
LAN	On	Port is connected properly (LINK).
	Blink	Port is sending or/and receiving data (ACT).
	Off	Port connection exception or not connected.
NORMAL	On	Input optical power is between -18dBm and 2dBm
NORMAL	Off	Input optical power is higher than 2dBm or lower than -18dBm
WARN	On	Input optical power is higher than 2dBm or lower than -18dBm
WARN	Off	Input optical power is between -18dBm and 2dBm