Long N Type Connector 100W PA1200-1500MHz Rf Power Amplifier Bidirectional For Anti Drone Module
Long N type connector 100W PA1200-1500MHz rf power amplifier bidirectional anti drone module
This is long N type connector high power 100W bidirectional RF power amplifier module ,the module main features is that stable input 0-10dB,longer output connector and capable of achieving ultra-wide bandwidth.Customers can choose a solution without signal source or with external signal source according to their needs.
No signal source build in the power amplifier can applicated in signal base station tower ,It can receive and enhance the communication signals used.External signal sources are usually used as interference signals for drones.Regardless of the usage scenario, this broadband amplifier can achieve relatively good results.
Product specification
| No. | Item | Data | Unit |
| 1 | Frequency | 1200-1500 | MHz |
| 2 | Test voltage | 28-32 | V |
| 3 | Current | 10 | A |
| 4 | Output | 100 | W |
| 5 | Gain | 50 | dbm |
| 6 | Output stability | 1 | dB |
| 7 | Input stability | 0-10 | dB |
| 8 | Connector | N / Female | |
| 9 | Output connector VSWR | ≤1.30 (No power and VNA test) | |
| 10 | Power supply wire | Red+Black+Enable wire | |
| 11 | Enable Control | High ON Low Off | |
| 12 | Out shell Size | 229*90*24 | mm |
| 13 | Mount hole | 221*83 | mm |
| 14 | Weight | 900 | g |
| 15 | Work Temperature | -40~+65 | ℃ |
| 16 | Out shell material | Aluminum | |
| 17 | Vibration need |
Car load OK |
|
| DIP No. | PIN definition | Function | Remark |
| 1 | D6 | Attenuate 16dB | High level attenuation Low level does not attenuate |
| 2 | D5 | Attenuate 8dB | |
| 3 | D4 | Attenuate 4dB | |
| 4 | D3 | Attenuate 2dB | |
| 5 | D2 | Attenuate 1dB | |
| 6 | D1 | Attenuate 0.5dB | |
| 7 | LE | Serial Latch Enable Input | |
| 8 | P/S | Serial/Parallel Mode Selection | High level serial mode (software control) |
| Low level parallel mode (manual control) |
Product Feature
1. Able to meet 100 watts of full wattage
2. Double connector, both output and input are made of high-grade metal materials
3. Supports use with own external signal source
4. The module supports28V-32V operating voltage
5. 1200-1500MHz supper frequency band
6.Input gain 0-10 dB
7.Aluminum alloy material is waterproof, highly conductive and heat-dissipating
Attention
- Power supply better carry about 28V 4.5A when itself 3A for its stable work
- Heat dissipation measure is necessary including the thermal glue, suitable-size heat sink and cooling fans
- Antenna or Load must be firstly connected before the power supply is ON or it will be short wire
Application
FAQ
1. Are you a manufacturer?
Yes, our factory is located in Longgang District, Shenzhen, welcome to visit us here
2. MOQ?
1 to 100pcs
3 . Payment term?
T/T, Trade Assurance(Visa, Master card, E-checking,etc), WestUnion, Paypal, etc
4. How to proceed with an order?
AA. Let us know your requirements and product application through inquiry on . We quote according to your specification C.Customers agree with the quotation and make the payment
5. What do do if I receive defective products?
Our strict quality control will ensure a 100% pass rate. But it can be damaged in the way. Please kindly share the defective product photo or video to let us know where the problem is. We will make the compensation accordingly or send you a new electronic part or product.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.