WIFI 5G 5.2ghz 5.8ghz GaN chip circulator anti drone jammer amplifier module
WIFI 5G 5.2ghz 5.8ghz GaN chip circulator anti drone jammer amplifier module
This wifi 5.2ghz 5.8ghz anti drone jammer module is of the high average output power, good in-band flatness and the small offset between upper and lower side band. The frequency band and output power of the module can be customized according to customer needs.
*High performance cost ratio
*Warm up slowly
*Low dielectric loss
Product Features
* With small size and light weight ,it is convenient to install the anti drone jammer system
* It is special designed for HD image drone 5.2ghz 5.8ghz
* With aluminum alloy shell , very rugged , anti-corrosion ,anti-heat.
*This band support multiple signal bands customization according to personal request such as 2.4ghz 5.2ghz gnss 5.8ghz
*When shielding the drone signal, only the drone signal is shielded, and it will not have any adverse effect on the base station.
*With stable high output 100W jamming subject only 3-5seconds .
Product Application
For This anti drone jammer module :
* It can be used in examination rooms, conference rooms, libraries, churches and other places where the use of drone is prohibited to prevent students from cheating and mobile phone noise pollution;
* It can be used in gas stations, gas stations, oil depots and other places to prevent fire or explosion caused by people using fpv here;
*It can be used in serious places such as government bases and courts to prevent leaks;
* It can be used in companies or factories to prevent work accidents caused by the illege drone .
Specifications :
| No. | Item | Data | Unit |
| 1 | Frequency | Customized | MHz |
| 2 | Test voltage | 28 | V |
| 3 | Current | 3.8 | A |
| 4 | Output | 50 | W |
| 5 | Gain | 47 | dB |
| 6 | Output stability | 1 | dB |
| 7 | Connector | SMA/ Female | |
| 8 | Output connector VSWR | ≤1.30 (No power and VNA test) | |
| 9 | Power supply wire | Red+Black+Enable wire | |
| 10 | Enable Control | High ON Low Off | |
| 11 | Out shell Size | 132*53*18 | mm |
| 12 | Mount hole | 125*46 | mm |
| 13 | Weight | 250 | g |
| 14 | Work Temperature | -40~+65 | ℃ |
| 15 | Out shell material | Aluminum | |
| 16 | Vibration need | Car load OK | |
Pictures :
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.

