Aluminium Foil Bags Heat Sealing Machine Packing Machine Cup Side Heat Sealing Machine

Automatic Rotary Single Head Roll Film Heat Sealing Machine (Contain filling nitrogen function )

1. Main machine appearance main materials are SUS304 stainless steel and T6 hard aluminum alloy;

2. Bottle diameter:50-100mm(only limit at one bottle diameter, need to replace sealing head mold for different bottle diameter,replace time is around 30 mins);

3. Bottle height: 60-200mm adjustable(can customize for special height);

4. Suitable for bottle and cup: plastic bottle or cup, tin can, aluminum can, paper can, paper cup, glass bottle or cup

5.Bottle requirements: hard bottle body, bottle mouth is smooth;

6. Sealing speed: about 20~25 cans/min(Speed will be different according to different bottles size & roll film type);

7. Aluminum foil requirement: Aluminum foil materials should be corresponding to the can materials(For example: PET material can use the PET film, PE material can use PE film), aluminum foil thickness: 0.1-0.4mm.

8. Rated voltage: Single phase AC220V 50Hz, Conveyor motor power 200W, film retrieve motor power 25W,2 pcs heating head power 400W, star wheel power 450W,total power 1475W;

9. Machine size:2200*1030*2030mm(with 2.2 meter conveyor), Polywood case packing size: 190x120x214cm 4.88cbm

10. Net weight:350KG, Gross weight :430KG;

11. Seal time 1.2-2s, temperature set at 180-210℃;

12. Height of conveyor distant to ground is 900mm(+50mm), conveyor belt width:114mm;

13. This machine need additionally configure air compressor, the minimum air source pressure required 0.6MPa.

14.Contain filling nitrogen function.