4m 6m Metal Iron Sheet Cutting Hydraulic Bending Machine Automatic

Price Negotiable

Price: Negotiable

MOQ: 1 set

Delivery Time: 30days

Brand: FMS

Product Description

4m 6m Metal Iron Sheet Cutting Hydraulic Bending Machine Automatic

4m 6m Metal Iron Sheet Cutting Hydraulic Bending Machine Automatic Usage:

1. First, connect the power supply, open the key switch on the control panel, and then press the oil pump to start, so that you can hear the sound of the oil pump. (The machine does not act at this time) 2, travel adjustment, the use of the bending machine must pay attention to adjust the travel, must be tested before bending. Bending machine die down to the bottom must ensure that there is a plate thickness clearance. Otherwise, it will cause damage to the mold and machine. The adjustment of the stroke is also electric quick adjustment and manual stomach adjustment. 3, bending groove selection, generally choose the plate thickness of 8 times the width of the notch. Such as bending 4mm sheet material, need to choose about 32 notch. 4, the rear stopper adjustment is generally electric rapid adjustment and manual fine tuning, the method is the same as the plate shearing machine. 5, step down the foot switch to start bending, bending machine and shearing machine is different, can be released at any time, loosen the foot bending machine will stop, continue to step down.

Equipment Detailed Parameters:

No.	Main parameter
1	Suitable to process	color steel plate, steel plate, galvanized sheet and so an.
2	Raw material thickness	0.3 ~ 1 mm
3	Bending Angle	30° 45° 60° 90° 130°
4	Motor power	3KW
5	length	as per requested
6	Material	prepaitned steel
7	Warranty of core components	1 Year
8	Voltage	380V 50Hz 3phasesas per requested
9	Core Components	Motor, PLC
10	length	6m