Rock Wool / Mineral Wool Insulation Sandwich Panel Roll Forming Machine / Production Line Prices
Product Description:
environmental protection etc. It can be widely used in the external wall of retaining and decoration of high-rise building and senior office building The Rock wool and foam sandwich panel is the new wall building material for retaining, decoration and heat preservation. It is the most popular of new generation of decorative wall retaining timber construction. The product of this line—Rock wool and foam sandwich panel is produced with foaming at working site. There’s device which can inject the foaming material between the upper and lower metal sheet ,then will be sent into double belt and evenly forwarded. The chemosynthesis and solidification are finished inside of double belt. The cutting is finished according to the length which is set before running themachine, it is non-stop cutting type, and the cutter will be moved along with the panel.
Technical Parameters:
| Product Name: | Sandwich Panel Making Machine |
| Material Thickness: | 0.3-0.8mm |
| Main Motor Power: | Total 32KW |
| Forming Speed: | 3-6m/min |
| Dimension: | 45m*2.5m*2.4m |
| Control System: | PLC |
| Material Width: | 1250mm |
| Warranty: | 2 Year |
| Cutting Length Error: | ±2mm |
| Voltage: | 380V/50HZ/3Phase |
Applications:
1. The whole machine is controlled by PLC, and multiple safety protections can be set to effectively avoid accidents;
Packing and Shipping:
The sandwich panel roll forming machine will be packed using a sturdy wooden case to ensure that it is protected from damage during transportation. The machine will also be wrapped in a layer of protective film to prevent scratches and other minor damages.
Shipping:
The sandwich panel roll forming machine will be shipped via sea or air, depending on the customer's preference. We will arrange for a reliable and trusted shipping company to handle the transportation of the machine. The customer will be provided with a tracking number so they can monitor the progress of their shipment.
FAQ:
Q: Are you a trading company or a factory?
A: We are factory with professional production team and service consciousness just for exporting various types of cold roll
forming machines.
Q: Can a machine produce only one style panel profile?
A: Not complete. Suitable for wider and double layer manufacturing machines. It can produce more than 3 panels.
Q: How long does it take to manufacture the machine?
A: In general, the machine can be completed in 20 to 45 business days. But if you need machines urgently, we can save you time.
Q: Is there quality control when producing the production line?
A: Yes, we have a team that is responsible for quality control, including the laying of raw materials, processing rolls and other
parts, processing, assembly, testing and packaging on the roll surface and shaft.
Q: What can you do if the machine broken?
A: Our machine is warranted for 24 months. If the damaged part cannot be repaired, we can send a new part to replace the damaged
part, but you will need to pay the courier fee yourself. If the warranty period is exceeded, we can resolve the issue through
negotiation and we provide technical support for the entire life cycle of the device.
Q: What is your strength compared to other suppliers?
A: We will give you the best service. We will provide you with good advice that exceeds your requirements. These lines are easy to
install and have low maintenance requirements.
Q: Can we become your agent abroad?
A: Of course, if you have a business in the rolling forming line, we will welcome a lot of cooperation.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.