Vacuum Cup Fittings Spring Buffer Strut MTE-STARR Double Spring Type

1. Introduction

• Maintenance free, with extremely long operating lifetime; suitable for short cycle times
• Guarantees soft placement on easily damaged workpieces. Absorbs shocks and vibration. Prevents excessively long strokes
• Available for a wide range of applications and for all suction cups of the standard range

2. Usage

• Spring plunger with two damping springs and special slide bearings for handling workpieces with differences in height, e.g. curved sheet metal or wooden parts;
• Handling very sensitive components without additional control requirements (e.g. glass sheets), it ensures that workpieces are set down gently;
• Handling very warped and naturally grown materials (e.g. dried wood) without additional technical control requirements;
• Use under harsh conditions;
• Highly dynamic handling tasks with short cycle times;

3. Structure

• Spring plunger with stainless steel plunger rod, brass guide sleeve with integrated sliding sleeve both lower (5) and upper (1) damping spring;
• High quality stainless steel mounting plate (2) for fixing brassguide sleeve (4) and integrated sliding sleeve the guide sleeve is attached by two lock nuts (3);
• Optional flexible joint (6) connection (high quality steel and vulcanized adhesive rubber) for maximum angular compensation;
• The powder coating mounting plate (7) is suitable for large-area clamp systems;

4. Technology Data:

5. Design Data