Intelligent Network Taps Embedded Traffic Data Capturing For Monitoring And Forwarding
Intelligent Network Taps Embedded Traffic Data Capturing for Monitoring and Forwarding
1. Overviews
- A full visual control of Data Acquisition device(0/2/4*10GE SFP+ plus 24*GE SFP ports)
- A full Data Scheduling Management device(duplex Rx/Tx processing)
- A full pre-processing and re-distribution device(bidirectional bandwidth 64Gbps)
- Supported collection & reception of link data from different network element locations
- Supported collection & reception of link data from different switch routing nodes
- Supported raw packet collected, identified, analyzed, statistically summarized and marked
- Supported to realize irrelevant upper packaging of Ethernet traffic forwarding, supported all kinds of Ethernet packaging protocols, and aslo 802.1q/q-in-q, IPX/SPX, MPLS, PPPO, ISL, GRE, PPTP etc. protocol packaging
- Supported raw packet output for monitoring equipment of BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other required traffic.
2. Intelligent Traffic Processing Abilities
ASIC Chip Plus TCAM CPU
64Gbps intelligent traffic processing capabilities
10GE Acquisition
10GE 0/2/4 ports, Max 4*10GE plus 24*GE ports Rx/Tx duplex processing, up to 64Gbps Traffic Data Transceiver at same time, for network Data Acquisition, simple Pre-processing
Data Filtering
Supported L2-L7 packet filtering matching, such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN, Ethernet type field and value, IP protocol number, TOS, etc. also supported flexible combination of up to 2000 filtering rules.
Load Balance
Supported load balance Hash algorithm and session-based weight sharing algorithm according to L2-L7 layer characteristics to ensure that the port output traffic dynamic of load balancing
Real-time Traffic Trend Monitoring
Supported real-time monitoring and statistics on port-level and policy-level data traffic, to show the RX / TX rate, receive / send bytes, No., RX / TX the number of errors, the maximum income / hair rate and other key indicators.
NetTAP® Visibility Platform
Supported NetTAP® Matrix-SDN Visual Control Platform Access
1+1 Redundant Power System(RPS)
Supported 1+1 Dual Redundant Power System
NT-CFTAP-24 26 28XG-D Network TAP NPB.pdf
3. Typical Application Structures
-
1/10GE Data Distribution Application 26/28XG-D only (as following)
As shown in the above, the scheme is mainly deployed in a large local area network (LAN) or operator 10GE and Gigabit Ethernet(GE) links environment, the backbone of the 10GE network traffic customization sexual shunt and then distributed to the intrusion detection system, traffic analyzer and audit system, such as bypass device, in this scenario the NT-CFTAP-28XG-D with the method of hybrid deployment, flexible customization input/output interface, perfect solution in the actual network monitoring equipment for the demand of network data trafficc.
4. Specifications
| NT-CFTAP-24 26 28XG-D NetTAP® NPB Functional Parameters | ||
| Network Interface | GE ports | 24*GE SFP slots |
| 10GE ports | 0/2/4*10GE SFP+ slots | |
| Deployment mode | SPAN monitoring input | support |
| In-line mode | support | |
| Total QTYs interface | 24/26/28 | |
| Traffic replication / aggregation / distribution | support | |
| Link QTYs supporting Mirror replication / aggregation |
1 -> N link traffic replication (N <24/26/28) |
|
| Functions | Distribution based on traffic identification | support |
| Distribution based on IP / protocol / port Five tuple traffic identification | support | |
| Distribution strategy based on protocol header the key labeled traffic identifies | support | |
| Strategic distribution based on deep message content identification | support | |
| Support Ethernet encapsulation independence | support | |
| CONSOLE Network Management | support | |
| IP/WEB Network Management | support | |
| SNMP V1/V2C Network Management | support | |
| TELNET/SSH Network Management | support | |
| SYSLOG Protocol | support | |
| User authentication function |
Password authentication based on user name
|
|
| Electric(1+1 Redundant Power System-RPS) | Rated supply voltage | AC110-240V/DC-48V [Optional] |
| Rated power frequency | AC-50HZ | |
| Rated input current | AC-3A / DC-10A | |
| Rated power function | 150W(24XG: 100W ) | |
| Environment | Operating Temperature | 0－50℃ |
| Storage Temperature | -20-70℃ | |
| Operating Humidity | 10%-95%, Non-condensing | |
| User Configuration | Console Configuration | RS232 Interface, 9600,8,N,1 |
| Password authentication | support | |
| Rack Height | Rack space (U) | 1U 460mm*45mm*440mm |
5. Order Information
NT-FTAP-24G-D 24*GE SFP ports
NT-CFTAP-26XG-D 24*GE SFP ports plus 2*10GE SFP+ ports
NT-CFTAP-28XG-D 24*GE SFP ports plus 4*10GE SFP+ ports
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.