UNS R60702 Zirconium Tube Corrosive Fluid Transmission Pipeline Systems ASME SB-658

Zirconium Tubing UNS R60702 for corrosive fluid transmission pipeline systems ASME SB-658

Zirconium Tubing is a kind of metal with strong corrosion resistance, which is suitable for equipment with chemical corrosion resistance. Its acid resistance is better than that of titanium and other steels, and similar to that of tantalum. Zirconium is also quite stable in alkali solution. It is widely used in tube heat exchanger, coil heat exchanger, serpentine tube heat exchanger, condenser, evaporator, pipeline and other heat exchange equipment.

CHEMICAL COMPOSITIONS

PHYSICAL PROPERTIES (NOMINAL)

Density: 6.51 g/cc
Melting point: 1852°C
Thermal conductivity: 22W/(m °C)
Elastic bending modulus: 99.6GPa
Thermal expansions: 5.4x10 /°C

Zirconium Tubing Specification

Seamless pipe OD(8-152) * t (0.5-15) * L (≤ 9000) mm

Welded pipe (outer diameter ≥ 10mm)

Executive Standards: ASTM B523 / B523M-18, ASME SB-523, ASTM B658 / B658M-11, ASME SB-658 / SB-658M, GB/T 26283-2010

Zirconium Tubing APPLICATIONS

Therefore, zirconium is mainly used in chemical equipment, especially in equipment with high corrosion resistance requirements. Zirconium is mainly used to make heat exchangers, vessel lining, valves, pump shells, blades, agitators, pipes, etc. in chemical equipment. Zirconium is used in many chemical equipment producing fertilizers, resins, plastics and acids.

Zirconium Tubing Picture:

PACKAGING

Our zirconium tubing is available in size range outside diameter 9.53–38.1 mm (3/8–1? in.) with wall thicknesses from 0.7 to 5 mm (0.0275 to 0.1968 in.). Zirconium tubes are delivered in straight lengths or as U-bent tubes.