Ti50Al50 TiAl Titanium Aluminum Alloy With High Purity 99%
Titanium Aluminum (TiAl) Alloy with high purity 99% Ti50Al50
Titanium aluminum alloy sputtering target can be made by two ways, HIP and melting.
The target by HIP will be higher density.
The target by melting will be higher purity. All is based on your application, JX will offer the right one for you.
Titanium aluminum sputtering target:
Titanium Aluminum (TiAl) Sputtering Targets
Purity --- Al-Ti35/65 at% Al/Ti 50:50 at%,99.95%,99.5%
Shape --- Discs, Plate, Step (Dia ≤450mm, Thickness ≥1mm)
Rectangle, Sheet, Step (Length ≤410mm, Width ≤300mm, Thickness ≥1mm)
Tube( Diameter< 300mm, Thickness >2mm )
Application --- Primary used in tools coating, Non-corrosion Valve/Chemical Plants, Marine Industrials.
Titanium Aluminum (TiAl) Alloy
Purity--- Al-Ti (35/65at%), Al/Ti (50:50 at%),AlTi 97/3wt%, AiTi 95/5wt%, AlTi 90/10wt%
Shape--- Granules, Ingot, broken ingot
| Name | Titanium Aluminum Alloy Sputtering Targets TIAL target |
| Shape | Square /round, according to your request |
| Available size |
Round: dia 25~250mm Rectangular: length up to 1500mm Customization is available |
| Proportion(wt%) | 5-80 ± 0.2Ti at your request. |
| Impurity content | low |
| Certificates | ISO9001:2008, the third test report |
| Technics | Vacuum melting |
| Application |
widely used in coating processing industries a: architectural glass, car using glass, graphic display field. b:electronic and semiconductor field. c:decoration and mould field. |
| Advantage |
High Hard texture Low impurity content Better heat dissipation High Tensile strength |
Chemical requirements
| N | C | H | Fe | O | Al | V | Pa | Mo | Ni | Ti | |
| Gr 1 | 0.03 | 0.08 | 0.015 | 0.20 | 0.18 | / | / | / | / | / | bal |
| Gr 2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | / | / | bal |
| Gr 3 | 0.05 | 0.08 | 0.015 | 0.30 | 0.35 | / | / | / | / | / | bal |
| Gr 4 | 0.05 | 0.08 | 0.015 | 0.50 | 0.40 | / | / | / | / | / | |
| Gr 5 | 0.05 | 0.08 | 0.015 | 0.40 | 0.20 | 5.5~6.75 | 3.5~4.5 | / | / | / | bal |
| Gr 7 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | 0.12~0.25 | / | / | bal |
| Gr 9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5~3.5 | 2.0~3.0 | / | / | / | bal |
| Gr12 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | 0.2~0.4 | 0.6~0.9 | bal |
Titanium Aluminum (TiAl) Alloy Picture:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.